Sealed cleanroom LED downlight with white round flush trim

クリーンルーム照明 · 電気機器

クリーンルームダウンライト

A compact recessed LED downlight with a flush sealed trim for local illumination where a full-size ceiling panel light is unnecessary.

Compact Recessed Aperture
Flush Round or Square Trim
Multiple Beam Distributions
Sealed Optical Window

見積もりリクエスト製品案内

商品紹介

The downlight places a compact LED module and reflector above a small ceiling aperture. A broad flush trim compresses a gasket against the cleanroom panel, while a clear or opal window seals the reflector and LED source from the room. Interchangeable optics can produce narrow task illumination or a wider general beam without changing the cleanable exposed geometry.

主要な特徴

The small aperture preserves ceiling area for filters and services.

A flush bezel covers the cut edge and creates a simple wipeable face.

Interchangeable reflectors tailor beam spread to work stations or corridors.

The sealed lens protects the recessed optical chamber from room contamination.

A remote driver option reduces heat and service depth at the aperture.

お客様の製品に関する懸念事項

Compact task lighting often leaves an open reflector and rough ceiling cutout exposed to the controlled room.

An open downlight reflector collects dust above the ceiling line.A clear or opal front window seals the complete optical aperture.

A narrow trim does not cover an imperfect ceiling cut.The overlapping sanitary bezel conceals and seals the panel edge.

One fixed beam either over-lights a spot or wastes light outside it.Selectable narrow, medium and wide optics match the local task footprint.

A deep integral driver conflicts with shallow plenum services.The driver can be located remotely with only the compact LED module at the opening.

典型的な用途

Airlock accent lightingEquipment task zonesCleanroom vestibulesLaboratory counters

技術的なパラメータ

Typical configurable construction ranges for a sealed cleanroom LED downlight are listed below.

コア材料	Die-cast aluminum LED module with reflector, sealed polycarbonate lens and formed steel or aluminum trim
パネルの厚さ	60-140 mm recessed body depth
有効幅	100-220 mm visible trim diameter or width
最大長さ	Up to 250 mm complete recessed housing length
鋼鉄の厚さを直面する	0.8-1.2 mm formed sheet-steel back box where selected
コア密度	Approximately 2700 kg/m³ for the aluminum LED heat-sink body
熱伝導率	160-205 W/(m·K) for the aluminum heat sink
表面仕上げ	White powder-coated flush trim with clear, opal or prismatic sealed lens
ジョイントタイプ	Overlapping recessed bezel with continuous gasket, spring or screw retention and sealed lens cup
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Round or square apertureNarrow, medium or wide beamFixed or adjustable optical moduleNative amber or red LED

Planning a Cleanroom Downlight specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する