Sealed cleanroom LED downlight with white round flush trim

Pencahayaan bilik bersih dan peralatan elektrik

Downlight bilik bersih

A compact recessed LED downlight with a flush sealed trim for local illumination where a full-size ceiling panel light is unnecessary.

Compact Recessed Aperture
Flush Round or Square Trim
Multiple Beam Distributions
Sealed Optical Window

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

The downlight places a compact LED module and reflector above a small ceiling aperture. A broad flush trim compresses a gasket against the cleanroom panel, while a clear or opal window seals the reflector and LED source from the room. Interchangeable optics can produce narrow task illumination or a wider general beam without changing the cleanable exposed geometry.

Ciri-ciri Utama

The small aperture preserves ceiling area for filters and services.

A flush bezel covers the cut edge and creates a simple wipeable face.

Interchangeable reflectors tailor beam spread to work stations or corridors.

The sealed lens protects the recessed optical chamber from room contamination.

A remote driver option reduces heat and service depth at the aperture.

Kebimbangan Produk Pelanggan

Compact task lighting often leaves an open reflector and rough ceiling cutout exposed to the controlled room.

An open downlight reflector collects dust above the ceiling line.A clear or opal front window seals the complete optical aperture.

A narrow trim does not cover an imperfect ceiling cut.The overlapping sanitary bezel conceals and seals the panel edge.

One fixed beam either over-lights a spot or wastes light outside it.Selectable narrow, medium and wide optics match the local task footprint.

A deep integral driver conflicts with shallow plenum services.The driver can be located remotely with only the compact LED module at the opening.

Permohonan yang biasa

Airlock accent lightingEquipment task zonesCleanroom vestibulesLaboratory counters

Parameter teknikal

Typical configurable construction ranges for a sealed cleanroom LED downlight are listed below.

Bahan Teras	Die-cast aluminum LED module with reflector, sealed polycarbonate lens and formed steel or aluminum trim
Ketebalan Panel	60-140 mm recessed body depth
Lebar berkesan	100-220 mm visible trim diameter or width
Panjang maksimum	Up to 250 mm complete recessed housing length
Keluli Menghadapi Ketebalan	0.8-1.2 mm formed sheet-steel back box where selected
Ketumpatan teras	Approximately 2700 kg/m³ for the aluminum LED heat-sink body
Kekonduksian Terma	160-205 W/(m·K) for the aluminum heat sink
Kemasan permukaan	White powder-coated flush trim with clear, opal or prismatic sealed lens
Jenis Bersatu	Overlapping recessed bezel with continuous gasket, spring or screw retention and sealed lens cup
Penyesuaian	Boleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi.

Pilihan yang boleh didapati

Round or square apertureNarrow, medium or wide beamFixed or adjustable optical moduleNative amber or red LED

Planning a Cleanroom Downlight specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami