Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Control de salas limpias y sistemas de monitoreo ambiental
Sistema de control de flujo de aire
A closed-loop airflow package that measures supply or exhaust volume and drives a modulating damper to maintain the commanded cleanroom air quantity.
- Closed-Loop Air Volume
- Multi-Point Duct Sensing
- Fast Damper Actuation
- Stable Low-Flow Control
Introducción del producto
The airflow control system combines a duct averaging sensor, differential pressure transmitter, airflow controller and modulating damper actuator. The controller converts the measured velocity pressure into air volume using the configured duct area and continuously positions the damper. Low-flow cutoffs and sensor filtering prevent noisy readings from driving the actuator unnecessarily. The package can regulate supply, return or exhaust air and can share measured volume with the room pressure controller for coordinated cascade control.
Características clave
Configured duct dimensions convert pressure signal into a usable airflow-volume value.
Modulating actuator feedback confirms the commanded damper position was reached.
Filtering, deadband and low-flow handling stabilize control near minimum ventilation rates.
Preocupaciones del producto del cliente
Reliable air-volume control depends on representative sensing and an actuator response matched to the duct and pressure conditions.
A single-point duct reading changes with turbulence and elbow location.A multi-point averaging pickup provides a more representative velocity-pressure signal.
The damper hunts around the minimum airflow setpoint.Appropriate filtering, deadband and low-flow cutoff prevent reaction to measurement noise.
The displayed air volume is wrong after a duct size change.Field-configurable duct area and sensor coefficient recalculate volume for the installed branch.
A disconnected actuator is not noticed until room pressure drifts.Position feedback and airflow deviation alarms identify failed movement before the room leaves its normal band.
Aplicaciones típicas
Cleanroom supply-air branchesProcess exhaust regulationLaboratorio de maquillaje aire
porPressure-cascade airflow tracking
Parámetros técnicos
Typical construction for a cleanroom duct airflow controller and actuator package is listed below.
| Materiales Core | Aluminum averaging probe, flame-retardant polymer controller and galvanized steel damper frame |
|---|---|
| Panel de espesor | 60-140 mm controller and transmitter depth |
| Ancho efectivo | 120-300 mm controller width |
| Longitud máxima | Averaging probes up to 2000 mm |
| Acero frente a espesor | 0.8-1.5 mm galvanized steel damper casing |
| Densidad Core | 2650-2750 kg/m³ for aluminum probe components |
| Conductividad térmica | 150-220 W/(m·K) for the aluminum sensing probe |
| Superficie acabada | Natural anodized aluminum probe with white controller and zinc-coated damper frame |
| Tipo conjunto | Flanged duct pickup with barbed pressure ports and direct-coupled damper actuator |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
Supply or exhaust configurationCircular or rectangular duct probesBACnet or Modbus controllerSpring-return damper actuator
Planning a Airflow Control System specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
