Englisch
DeutschCurrent
Arabisch
Französisch
indonesisch
Japanisch
Koreanisch
Malaiisch
Portugiesisch
Russisch
Spanisch
Thailändisch
Türkischer Sprache
Vietnamesisch
Reinraumsteuerung und Umweltüberwachungssysteme
Airflow Control System
A closed-loop airflow package that measures supply or exhaust volume and drives a modulating damper to maintain the commanded cleanroom air quantity.
- Closed-Loop Air Volume
- Multi-Point Duct Sensing
- Fast Damper Actuation
- Stable Low-Flow Control
Produkteinführung
The airflow control system combines a duct averaging sensor, differential pressure transmitter, airflow controller and modulating damper actuator. The controller converts the measured velocity pressure into air volume using the configured duct area and continuously positions the damper. Low-flow cutoffs and sensor filtering prevent noisy readings from driving the actuator unnecessarily. The package can regulate supply, return or exhaust air and can share measured volume with the room pressure controller for coordinated cascade control.
Key Features
Configured duct dimensions convert pressure signal into a usable airflow-volume value.
Modulating actuator feedback confirms the commanded damper position was reached.
Filtering, deadband and low-flow handling stabilize control near minimum ventilation rates.
Kunden Produktbedenken
Reliable air-volume control depends on representative sensing and an actuator response matched to the duct and pressure conditions.
A single-point duct reading changes with turbulence and elbow location.A multi-point averaging pickup provides a more representative velocity-pressure signal.
The damper hunts around the minimum airflow setpoint.Appropriate filtering, deadband and low-flow cutoff prevent reaction to measurement noise.
The displayed air volume is wrong after a duct size change.Field-configurable duct area and sensor coefficient recalculate volume for the installed branch.
A disconnected actuator is not noticed until room pressure drifts.Position feedback and airflow deviation alarms identify failed movement before the room leaves its normal band.
Typische Anwendungen
Cleanroom supply-air branchesProcess exhaust regulationLaboratory make-up airPressure-cascade airflow tracking
Technische Parameter
Typical construction for a cleanroom duct airflow controller and actuator package is listed below.
| Core Material | Aluminum averaging probe, flame-retardant polymer controller and galvanized steel damper frame |
|---|---|
| Panel Dicke | 60-140 mm controller and transmitter depth |
| Effektive Breite | 120-300 mm controller width |
| Maximale Länge | Averaging probes up to 2000 mm |
| Stahl facing Dicke | 0.8-1.5 mm galvanized steel damper casing |
| Kerndichte | 2650-2750 kg/m³ for aluminum probe components |
| Thermische Leitfähigkeit | 150-220 W/(m·K) for the aluminum sensing probe |
| Oberfläche Finish | Natural anodized aluminum probe with white controller and zinc-coated damper frame |
| Gemeinsamer Typ | Flanged duct pickup with barbed pressure ports and direct-coupled damper actuator |
| Customisierung | Verfügbar je nach beabsichtigter Anwendung und Betriebsumgebung. |
Verfügbare Optionen
Supply or exhaust configurationCircular or rectangular duct probesBACnet or Modbus controllerSpring-return damper actuator
Planning a Airflow Control System specification?
Senden Sie uns Ihre Abmessungen, Installationsbedingungen, Leistungsziele und gewünschte Oberflächenveredelung.
