Anglais
Allemand
Arabe
FrançaisCurrent
Indonésien
Japonais
Coréen
Le malais
Le portugais
russe
espagnol
Thaïlandais
Le turc
Le vietnamien
Systèmes de contrôle des salles blanches et de surveillance environnementale
Système de contrôle du flux d'air par
A closed-loop airflow package that measures supply or exhaust volume and drives a modulating damper to maintain the commanded cleanroom air quantity.
- Closed-Loop Air Volume
- Multi-Point Duct Sensing
- Fast Damper Actuation
- Stable Low-Flow Control
Introduction de produit
The airflow control system combines a duct averaging sensor, differential pressure transmitter, airflow controller and modulating damper actuator. The controller converts the measured velocity pressure into air volume using the configured duct area and continuously positions the damper. Low-flow cutoffs and sensor filtering prevent noisy readings from driving the actuator unnecessarily. The package can regulate supply, return or exhaust air and can share measured volume with the room pressure controller for coordinated cascade control.
Key Features
Configured duct dimensions convert pressure signal into a usable airflow-volume value.
Modulating actuator feedback confirms the commanded damper position was reached.
Filtering, deadband and low-flow handling stabilize control near minimum ventilation rates.
Préoccupations du client produit
Reliable air-volume control depends on representative sensing and an actuator response matched to the duct and pressure conditions.
A single-point duct reading changes with turbulence and elbow location.A multi-point averaging pickup provides a more representative velocity-pressure signal.
The damper hunts around the minimum airflow setpoint.Appropriate filtering, deadband and low-flow cutoff prevent reaction to measurement noise.
The displayed air volume is wrong after a duct size change.Field-configurable duct area and sensor coefficient recalculate volume for the installed branch.
A disconnected actuator is not noticed until room pressure drifts.Position feedback and airflow deviation alarms identify failed movement before the room leaves its normal band.
Les applications typiques
Cleanroom supply-air branchesProcess exhaust regulationLaboratory make-up airPressure-cascade airflow tracking
Paramètres techniques
Typical construction for a cleanroom duct airflow controller and actuator package is listed below.
| Matériaux de base | Aluminum averaging probe, flame-retardant polymer controller and galvanized steel damper frame |
|---|---|
| Panneau épaisseur | 60-140 mm controller and transmitter depth |
| Largeur effective | 120-300 mm controller width |
| Longueur maximale | Averaging probes up to 2000 mm |
| Acier face épaisseur | 0.8-1.5 mm galvanized steel damper casing |
| Densité Core | 2650-2750 kg/m³ for aluminum probe components |
| Conductivité thermique | 150-220 W/(m·K) for the aluminum sensing probe |
| surface finie | Natural anodized aluminum probe with white controller and zinc-coated damper frame |
| Type joint | Flanged duct pickup with barbed pressure ports and direct-coupled damper actuator |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation. |
Options disponibles
Supply or exhaust configurationCircular or rectangular duct probesBACnet or Modbus controllerSpring-return damper actuator
Planning a Airflow Control System specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
