Single-glazed cleanroom observation window in a slim sealed frame

Двери в чистых помещениях, окна и системы блокировки

Одностеклянное окно наблюдения в чистой комнате

A slim fixed observation window using one clear tempered safety-glass pane in a sealed aluminum or stainless-steel frame for interior cleanroom partitions.

Single Tempered Pane
Slim Hygienic Frame
Clear Process Visibility
Sealed Fixed Glazing

Запрос котировки Просмотреть продукты

Введение продукции

This single-glazed observation window provides direct sightlines through an internal cleanroom wall without the deeper cavity of an insulated unit. The pane is retained in a rigid subframe with continuous glazing seals, and the exposed frame edges are kept smooth for routine wiping. Its shallow build suits low-thermal-load interior partitions, equipment observation points and retrofit openings where pressure separation is moderate and a simple fixed pane is preferred.

Основные характеристики

One safety-glass pane keeps the assembly shallow and reduces concealed surfaces inside the frame.

Continuous glazing tape or structural silicone closes the glass-to-frame perimeter against air and particle leakage.

A narrow anodized or powder-coated frame preserves a wide clear viewing area in compact wall openings.

Factory-cut glass and finished edges provide a stable fixed pane without exposed clips on the clean side.

Обеспокоенность клиентов продуктами

A single-pane window must remain cleanable and mechanically secure while avoiding the ledges and exposed retainers found on general-purpose glazing.

Surface-mounted glazing beads create narrow ledges that retain cleaning residue.The pane sits within a purpose-built cleanroom frame with smooth sealed reveals and no loose exposed clips.

A thin pane can rattle when doors close or room pressure changes.Continuous resilient glazing seals support the pane on all sides and maintain controlled compression.

A bulky double-glazed frame consumes valuable clear opening in a small partition.The single-pane construction uses a shallower perimeter profile and leaves more usable sight area.

Типичные приложения

Interior cleanroom corridorsLaboratory observation partitionsEquipment enclosure viewing pointsLow-pressure personnel airlocks

Технические параметры

Typical construction ranges for an interior single-glazed cleanroom observation window are listed below.

Основной материал	Single clear tempered safety-glass pane in an aluminum or stainless-steel subframe
Толщина панели	6–12 mm glass thickness; typically 25–60 mm overall frame depth
эффективная ширина	300 - 1500 мм широта видимости
Максимальная длина	2400 mm overall window height
Толщина линий стали	1.0–1.5 mm for stainless-steel frame skins; 0 mm for all-aluminum frames
Плотность ядра	Approximately 2500 kg/m³ for soda-lime safety glass
Теплопроводимость	Approximately 1.0 W/(m·K) for clear soda-lime glass
Поверхностная отделка	Clear anodized or powder-coated aluminum; brushed 304/316 stainless steel optional
Объединенный тип	Fixed single glazing with continuous EPDM glazing tape or neutral-cure structural silicone
Customization	Доступно в зависимости от предполагаемого приложения и операционной среды

Доступные варианты

6, 8, 10 or 12 mm tempered glassLow-iron or laminated safety glassAnodized aluminum or stainless-steel frameRectangular and narrow vertical formats

Planning a Single-Glazed Cleanroom Observation Window specification?

Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.

Поговорите с нашей командой