Single-glazed cleanroom observation window in a slim sealed frame

클린룸 도어, 창문 및 인터락 시스템

단일 유리 클린룸 관찰 창

A slim fixed observation window using one clear tempered safety-glass pane in a sealed aluminum or stainless-steel frame for interior cleanroom partitions.

Single Tempered Pane
Slim Hygienic Frame
Clear Process Visibility
Sealed Fixed Glazing

견적 요청 제품 찾아보기

상품 소개

This single-glazed observation window provides direct sightlines through an internal cleanroom wall without the deeper cavity of an insulated unit. The pane is retained in a rigid subframe with continuous glazing seals, and the exposed frame edges are kept smooth for routine wiping. Its shallow build suits low-thermal-load interior partitions, equipment observation points and retrofit openings where pressure separation is moderate and a simple fixed pane is preferred.

주요 기능

One safety-glass pane keeps the assembly shallow and reduces concealed surfaces inside the frame.

Continuous glazing tape or structural silicone closes the glass-to-frame perimeter against air and particle leakage.

A narrow anodized or powder-coated frame preserves a wide clear viewing area in compact wall openings.

Factory-cut glass and finished edges provide a stable fixed pane without exposed clips on the clean side.

고객 제품 관심사

A single-pane window must remain cleanable and mechanically secure while avoiding the ledges and exposed retainers found on general-purpose glazing.

Surface-mounted glazing beads create narrow ledges that retain cleaning residue.The pane sits within a purpose-built cleanroom frame with smooth sealed reveals and no loose exposed clips.

A thin pane can rattle when doors close or room pressure changes.Continuous resilient glazing seals support the pane on all sides and maintain controlled compression.

A bulky double-glazed frame consumes valuable clear opening in a small partition.The single-pane construction uses a shallower perimeter profile and leaves more usable sight area.

일반적인 응용 프로그램

Interior cleanroom corridorsLaboratory observation partitionsEquipment enclosure viewing pointsLow-pressure personnel airlocks

기술 매개변수

Typical construction ranges for an interior single-glazed cleanroom observation window are listed below.

핵심 재료	Single clear tempered safety-glass pane in an aluminum or stainless-steel subframe
패널 두께	6–12 mm glass thickness; typically 25–60 mm overall frame depth
유효 폭	300 - 1500 mm 명확한 시야 폭
최대 길이	2400 mm overall window height
강철 면면 두께	1.0–1.5 mm for stainless-steel frame skins; 0 mm for all-aluminum frames
코어 밀도	Approximately 2500 kg/m³ for soda-lime safety glass
열전도도 (Thermal Conductivity)	Approximately 1.0 W/(m·K) for clear soda-lime glass
표면 마무리	Clear anodized or powder-coated aluminum; brushed 304/316 stainless steel optional
접합 유형	Fixed single glazing with continuous EPDM glazing tape or neutral-cure structural silicone
사용자 정의	사용 대상 어플리케이션 및 운영 환경에 따라 사용 가능

사용 가능한 옵션

6, 8, 10 or 12 mm tempered glassLow-iron or laminated safety glassAnodized aluminum or stainless-steel frameRectangular and narrow vertical formats

Planning a Single-Glazed Cleanroom Observation Window specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.