English
Немецкий
Арабский язык
Французский
Индонезийский
Японский язык
Корейский
Японский
Португальский
Русский языкТекущий
Испанский язык
Тайский
Турецкий
Вьетнамский язык
Стенные и потолочные системы для чистых комнат
Химически устойчивая панель чистой комнаты с покрытием ПВДФ
A polyurethane-core cleanroom wall panel with thick PVDF-coated galvanized steel facings and compatible sealed joints, designed for laboratories and process areas exposed to repeated disinfectants, splashes and chemical cleaning.
- PVDF-Coated Steel Surface
- Chemical-Tolerant Joint System
- Closed-Cell PU Core
- Smooth Non-Porous Finish
Введение продукции
PVDF-Coated Chemical-Resistant Cleanroom Panels use a durable fluoropolymer finish over galvanized steel skins bonded to a rigid polyurethane core. PVDF provides stronger resistance to many disinfectants, acids and cleaning agents than standard polyester paint while retaining a smooth non-porous surface. Chemical performance also depends on the joint sealant, trims and fasteners, so these interfaces use compatible materials rather than ordinary construction compounds. The panel forms a lightweight insulated wall for laboratories, pharmaceutical process rooms and other controlled interiors with demanding cleaning cycles.
Основные характеристики
A smooth fluoropolymer surface releases residue more readily than porous wall finishes.
Compatible sealants protect joints, corners and cut-outs where chemical attack often begins.
Closed-cell PU insulation keeps the wall light and thermally stable.
Replaceable modules allow localized surface damage to be repaired without rebuilding the complete enclosure.
Обеспокоенность клиентов продуктами
Reliable chemical resistance requires the facing, sealant, trims and exposure conditions to be considered as one surface system.
Standard polyester paint can soften, stain or lose gloss after repeated chemical cleaning.A thicker PVDF finish provides a more durable barrier against many common disinfectants and process splashes.
An incompatible sealant may fail before the main panel face shows damage.Chemical-compatible joint and perimeter sealants protect every interface exposed to the room.
Residue remaining on a textured surface prolongs chemical contact and accelerates attack.The smooth non-porous coating supports prompt rinsing and complete wipe removal.
Localized splash damage can force replacement of a large conventional wall area.Demountable modules allow the affected panel and trims to be replaced individually.
Типичные приложения
Pharmaceutical process and wash roomsLaboratory sample-preparation spacesBattery and specialty-material clean areasFood rooms using frequent disinfectantsBiotechnology chemical-handling zones
Технические параметры
Typical construction specifications for PVDF-coated chemical-resistant cleanroom panels are listed below.
| Основной материал | Rigid closed-cell polyurethane foam |
|---|---|
| Толщина панели | 50, 75 or 100 mm |
| эффективная ширина | 1070 or 1150 mm |
| Максимальная длина | 6000 mm |
| Толщина линий стали | 0.60–0.80 mm |
| Плотность ядра | 40 ± 2 kg/m³ |
| Теплопроводимость | 0.023–0.026 W/(m·K) |
| Поверхностная отделка | 25–30 μm PVDF-coated galvanized steel with smooth cleanroom finish |
| Объединенный тип | Flush tongue-and-groove connection with chemical-compatible sealant |
| Customization | Доступно в зависимости от предполагаемого приложения и операционной среды |
Доступные варианты
Alternative PVDF coating thickness316L stainless steel process-side faceChemical-compatible trim packageCustom laboratory cut-outs
Planning a PVDF-Coated Chemical-Resistant Cleanroom Panel specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
