Complete PVDF-coated chemical-resistant cleanroom wall panel

클린룸 벽 및 천장 시스템

PVDF - Coated 화학 저항성 클린룸 패널

A polyurethane-core cleanroom wall panel with thick PVDF-coated galvanized steel facings and compatible sealed joints, designed for laboratories and process areas exposed to repeated disinfectants, splashes and chemical cleaning.

PVDF-Coated Steel Surface
Chemical-Tolerant Joint System
Closed - Cell PU 코어
Smooth Non-Porous Finish

견적 요청 제품 찾아보기

상품 소개

PVDF-Coated Chemical-Resistant Cleanroom Panels use a durable fluoropolymer finish over galvanized steel skins bonded to a rigid polyurethane core. PVDF provides stronger resistance to many disinfectants, acids and cleaning agents than standard polyester paint while retaining a smooth non-porous surface. Chemical performance also depends on the joint sealant, trims and fasteners, so these interfaces use compatible materials rather than ordinary construction compounds. The panel forms a lightweight insulated wall for laboratories, pharmaceutical process rooms and other controlled interiors with demanding cleaning cycles.

주요 기능

PVDF coating provides improved resistance to repeated disinfectants and many process chemicals.

A smooth fluoropolymer surface releases residue more readily than porous wall finishes.

Compatible sealants protect joints, corners and cut-outs where chemical attack often begins.

Closed-cell PU insulation keeps the wall light and thermally stable.

Replaceable modules allow localized surface damage to be repaired without rebuilding the complete enclosure.

고객 제품 관심사

Reliable chemical resistance requires the facing, sealant, trims and exposure conditions to be considered as one surface system.

Standard polyester paint can soften, stain or lose gloss after repeated chemical cleaning.A thicker PVDF finish provides a more durable barrier against many common disinfectants and process splashes.

An incompatible sealant may fail before the main panel face shows damage.Chemical-compatible joint and perimeter sealants protect every interface exposed to the room.

Residue remaining on a textured surface prolongs chemical contact and accelerates attack.The smooth non-porous coating supports prompt rinsing and complete wipe removal.

Localized splash damage can force replacement of a large conventional wall area.Demountable modules allow the affected panel and trims to be replaced individually.

일반적인 응용 프로그램

Pharmaceutical process and wash roomsLaboratory sample-preparation spacesBattery and specialty-material clean areasFood rooms using frequent disinfectantsBiotechnology chemical-handling zones

기술 매개변수

Typical construction specifications for PVDF-coated chemical-resistant cleanroom panels are listed below.

핵심 재료	단단한 폐쇄 셀 폴리우레탄 폼
패널 두께	50, 75 또는 100 mm
유효 폭	1070 or 1150 mm
최대 길이	6000 mm
강철 면면 두께	0.60–0.80 mm
코어 밀도	40 ± 2 kg/m³
열전도도 (Thermal Conductivity)	0.023–0.026 W/(m·K)
표면 마무리	25–30 μm PVDF-coated galvanized steel with smooth cleanroom finish
접합 유형	Flush tongue-and-groove connection with chemical-compatible sealant
사용자 정의	사용 대상 어플리케이션 및 운영 환경에 따라 사용 가능

사용 가능한 옵션

Alternative PVDF coating thickness316L stainless steel process-side faceChemical-compatible trim packageCustom laboratory cut-outs

Planning a PVDF-Coated Chemical-Resistant Cleanroom Panel specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.