Portable particle counter in three-quarter front view on a white background

Приборы для испытаний и валидации в чистых помещениях

Портативный счетчик частиц

A high-flow portable airborne particle counter for efficient cleanroom classification, qualification and routine environmental monitoring.

High-flow sampling reduces large-volume collection time.
Guided recipes keep field rounds consistent.
Wipe-clean steel body with HEPA-filtered exhaust.

Запрос котировки Просмотреть продукты

Введение продукции

This portable particle counter uses laser light scattering and a controlled internal pump to sample substantially larger air volumes than a handheld spot-check instrument. Its stainless-steel, wipe-clean housing, large touchscreen and removable battery arrangement are suited to room-to-room qualification work. Configurable sampling plans, location records and electronic data transfer help validation teams execute repeatable surveys while preserving the context of every result.

Основные характеристики

High-flow sampling shortens the time required to collect representative cleanroom air volumes.

Multiple particle-size channels support simultaneous classification and contamination diagnosis.

Chemical-resistant stainless-steel exterior tolerates common controlled-area cleaning agents.

Guided sampling locations and stored recipes reduce operator variation during qualification rounds.

Internal HEPA-filtered exhaust prevents sampled particles from being released back into the test area.

USB, Ethernet and configurable wireless connectivity support paperless result transfer.

Обеспокоенность клиентов продуктами

Large-volume classification rounds demand faster collection, repeatable recipes at every inspection point, and records that remain traceable when results are archived.

Low-flow instruments can make one-cubic-metre sampling rounds excessively slow.Select 28.3, 50 or 100 L/min configurations to match the required sample volume and available qualification time.

Paper printouts and manual transcription can weaken data integrity.Electronic recipes, user controls, audit-ready records and direct data transfer keep results associated with the original run.

Cleaning chemicals may damage instruments repeatedly moved through classified rooms.A smooth stainless-steel exterior is compatible with routine wipe-down using commonly specified cleanroom disinfectants.

Variable inlet tubing can create particle losses and inconsistent readings.Defined isokinetic probes and controlled tubing lengths provide a repeatable sampling path for each survey.

Типичные приложения

ISO cleanroom classification and periodic requalificationRoutine pharmaceutical environmental monitoringLarge-volume sampling in aseptic processing areasHEPA-filtered room recovery and contamination investigationsSemiconductor and precision-manufacturing clean-zone surveys

Технические параметры

The table defines representative body dimensions, sampling and data interfaces, and enclosure materials for a high-flow portable cabinet counter, with the model selected to match the sampling plan.

Основной материал	Stainless-steel outer enclosure with an internal laser optical block, regulated sampling pump and HEPA exhaust filter
Толщина панели	Approximately 1.0–1.5 mm for the fabricated enclosure panels
эффективная ширина	Approximately 230–267 mm according to flow-rate configuration
Максимальная длина	Approximately 230–270 mm excluding the isokinetic inlet
Толщина линий стали	Typically 1.0–1.5 mm stainless steel
Плотность ядра	Not applicable; the instrument enclosure has no insulation core (0 kg/m³)
Теплопроводимость	Approximately 14–16 W/(m·K) for the stainless-steel enclosure material
Поверхностная отделка	Smooth passivated or fine-brushed stainless steel with a sealed dark touchscreen bezel
Объединенный тип	Isokinetic or barbed sampling inlet, HEPA-filtered exhaust and configurable USB/Ethernet data interfaces
Customization	Доступно в зависимости от предполагаемого применения и операционной среды.

Доступные варианты

28.3, 50 or 100 L/min sampling flow configurations0.3 µm or 0.5 µm minimum sensitivity configurationsBuilt-in thermal printer or paperless configurationTemperature and relative-humidity probeElectronic filter-scanning probeAdditional batteries, charger and transport case

Planning a Portable Particle Counter specification?

Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.

Поговорите с нашей командой