Portable particle counter in three-quarter front view on a white background

클린룸 테스트 및 검증 장비

휴대용 입자 카운터

A high-flow portable airborne particle counter for efficient cleanroom classification, qualification and routine environmental monitoring.

High-flow sampling reduces large-volume collection time.
Guided recipes keep field rounds consistent.
Wipe-clean steel body with HEPA-filtered exhaust.

견적 요청 제품 찾아보기

상품 소개

This portable particle counter uses laser light scattering and a controlled internal pump to sample substantially larger air volumes than a handheld spot-check instrument. Its stainless-steel, wipe-clean housing, large touchscreen and removable battery arrangement are suited to room-to-room qualification work. Configurable sampling plans, location records and electronic data transfer help validation teams execute repeatable surveys while preserving the context of every result.

주요 기능

High-flow sampling shortens the time required to collect representative cleanroom air volumes.

Multiple particle-size channels support simultaneous classification and contamination diagnosis.

Chemical-resistant stainless-steel exterior tolerates common controlled-area cleaning agents.

Guided sampling locations and stored recipes reduce operator variation during qualification rounds.

Internal HEPA-filtered exhaust prevents sampled particles from being released back into the test area.

USB, Ethernet and configurable wireless connectivity support paperless result transfer.

고객 제품 관심사

Large-volume classification rounds demand faster collection, repeatable recipes at every inspection point, and records that remain traceable when results are archived.

Low-flow instruments can make one-cubic-metre sampling rounds excessively slow.Select 28.3, 50 or 100 L/min configurations to match the required sample volume and available qualification time.

Paper printouts and manual transcription can weaken data integrity.Electronic recipes, user controls, audit-ready records and direct data transfer keep results associated with the original run.

Cleaning chemicals may damage instruments repeatedly moved through classified rooms.A smooth stainless-steel exterior is compatible with routine wipe-down using commonly specified cleanroom disinfectants.

Variable inlet tubing can create particle losses and inconsistent readings.Defined isokinetic probes and controlled tubing lengths provide a repeatable sampling path for each survey.

일반적인 응용 프로그램

ISO cleanroom classification and periodic requalificationRoutine pharmaceutical environmental monitoringLarge-volume sampling in aseptic processing areasHEPA-filtered room recovery and contamination investigationsSemiconductor and precision-manufacturing clean-zone surveys

기술 매개변수

The table defines representative body dimensions, sampling and data interfaces, and enclosure materials for a high-flow portable cabinet counter, with the model selected to match the sampling plan.

핵심 재료	Stainless-steel outer enclosure with an internal laser optical block, regulated sampling pump and HEPA exhaust filter
패널 두께	Approximately 1.0–1.5 mm for the fabricated enclosure panels
유효 폭	Approximately 230–267 mm according to flow-rate configuration
최대 길이	Approximately 230–270 mm excluding the isokinetic inlet
강철 면면 두께	Typically 1.0–1.5 mm stainless steel
코어 밀도	Not applicable; the instrument enclosure has no insulation core (0 kg/m³)
열전도도 (Thermal Conductivity)	Approximately 14–16 W/(m·K) for the stainless-steel enclosure material
표면 마무리	Smooth passivated or fine-brushed stainless steel with a sealed dark touchscreen bezel
접합 유형	Isokinetic or barbed sampling inlet, HEPA-filtered exhaust and configurable USB/Ethernet data interfaces
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

28.3, 50 or 100 L/min sampling flow configurations0.3 µm or 0.5 µm minimum sensitivity configurationsBuilt-in thermal printer or paperless configuration온도 및 상대 습도 프로브 Temperature and relative humidity probeElectronic filter-scanning probeAdditional batteries, charger and transport case

Planning a Portable Particle Counter specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.