Three-quarter view of photocatalytic oxidation filter with blue UV-A lamps

Воздушные фильтры и химическая фильтрация

Модуль фотокаталитического окисления фильтра

A UV-A illuminated titanium-dioxide catalyst module that oxidizes selected low-concentration organic vapours and odours in recirculating air.

TiO2 Catalyst Surface
UV-A Activation
Low-Level VOC Treatment
Serviceable Lamp Module

Запрос котировки Просмотреть продукты

Введение продукции

The photocatalytic oxidation module combines UV-A lamps with a high-area honeycomb or mesh substrate coated in titanium dioxide. When illuminated, the catalyst generates reactive surface species that oxidize compatible organic molecules passing through the module. The rigid metal cassette protects the catalyst, maintains lamp spacing and slides into a dedicated air-treatment housing. Particle prefiltration keeps dust from shading the catalytic surface, while downstream adsorption can capture residual intermediates in demanding applications.

Основные характеристики

UV-A lamps activate a fixed titanium-dioxide coating without consuming a loose granular media bed.

Open honeycomb geometry exposes catalyst area while maintaining moderate pressure loss.

Removable lamp and catalyst sections can be serviced separately.

A metal safety screen shields the illuminated elements from accidental contact.

Обеспокоенность клиентов продуктами

PCO performance depends on light intensity, catalyst cleanliness and contaminant residence time rather than filter thickness alone.

Dust coats the catalyst and blocks UV light from the active surface.An upstream fine filter protects the catalyst and extends the cleaning interval.

Air crosses the module too quickly for meaningful oxidation.Catalyst depth, lamp power and face velocity are matched to the intended contaminant load.

Lamp output declines while the system still appears operational.Accessible lamp racks and operating-hour monitoring support scheduled replacement.

Partial oxidation creates intermediate compounds downstream.A polishing carbon stage can adsorb residual vapours after the photocatalytic section.

Типичные приложения

Laboratory recirculation unitsHealthcare odour reductionOffice and control-room air cleanersFood process support areasLow-concentration VOC polishing

Технические параметры

Typical construction ranges for a duct-mounted photocatalytic oxidation module are shown below.

Основной материал	Titanium-dioxide-coated aluminum honeycomb with UV-A lamp array
Толщина панели	100–250 mm catalyst and lamp module depth
эффективная ширина	300–610 mm nominal module width
Максимальная длина	Up to 1220 mm module height or lamp length
Толщина линий стали	0.8–1.2 mm stainless or powder-coated steel cassette
Плотность ядра	30–80 kg/m³ apparent density of the coated open-cell catalyst
Теплопроводимость	120–200 W/(m·K) for the aluminum catalyst substrate
Поверхностная отделка	White powder-coated frame with bonded titanium-dioxide catalyst coating
Объединенный тип	Slide-in metal cassette with keyed lamp connector and gasketed housing flange
Customization	Доступно в зависимости от предполагаемого применения и операционной среды.

Доступные варианты

Honeycomb or expanded-mesh catalystSingle or multiple UV-A lampsUpstream particle prefilterDownstream activated-carbon polishing stage

Planning a Photocatalytic Oxidation Filter Module specification?

Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.

Поговорите с нашей командой