Mobile transfer isolator with glove ports and blue rapid transfer interface

Обработка и хранение материалов в чистых помещениях

Мобильный изолятор передачи

A mobile hard-wall transfer isolator with HEPA filtration, glove access, rapid transfer port and battery-supported pressure control.

Hard-wall mobile barrier protects aseptic or contained transfers
Integrated glove ports, transfer hatch and rapid transfer interface
HEPA-filtered pressure control operates from mains or onboard battery

Запрос котировки Просмотреть продукты

Введение продукции

This compact isolator combines a welded stainless chamber, transparent glove window, purged side hatch and rapid transfer port on a height-adjustable mobile base. Independent supply and exhaust fans can establish the pressure mode selected for product or operator protection, while onboard low-voltage power supports controlled movement between processing stations.

Основные характеристики

Dual HEPA air paths support controlled positive or negative pressure modes.

Two glove ports allow manipulation without opening the main chamber.

Purged transfer hatch reduces direct exchange with the surrounding room.

Alpha-style rapid transfer interface supports closed container docking.

Battery-powered lift and airflow improve mobility and docking alignment.

Обеспокоенность клиентов продуктами

Critical materials must move between equipment without exposing the chamber, product or operator to an uncontrolled open transfer.

Barrier loss during manipulationIntegrated gauntlets maintain separation while operators handle chamber contents.

Contamination entering through material loadingThe purged transfer hatch provides a staged entry path.

Opening an isolator for container transferThe locking RTP interface docks compatible beta containers without exposing mating faces.

Airflow interruption during relocationThe onboard battery supports fans and controls away from mains power.

Типичные приложения

Aseptic component transfer, sterility-test support, closed sampling, cell-therapy material handling and contained movement of small process items.

Технические параметры

The isolator chamber uses smooth internal radii, gasketed service openings and monitored fan/filter modules. Pressure setpoint, airflow mode, RTP diameter, glove material and decontamination provisions are selected for the intended aseptic or containment process.

Основной материал	Type 316L stainless steel chamber with polycarbonate glazing, HEPA filters and elastomer glove sleeves
Толщина панели	30–50 mm hard-wall chamber and filter housing sections
эффективная ширина	700–1200 mm usable working chamber width
Максимальная длина	Up to 1800 mm overall mobile system length
Толщина линий стали	1.5–2.0 mm
Плотность ядра	8000 kg/m³ nominal 316L stainless steel density
Теплопроводимость	Approximately 14.6 W/(m·K) at room temperature
Поверхностная отделка	Mechanically polished and passivated stainless steel with smooth internal radii
Объединенный тип	Seam-welded hard-wall chamber with gasketed glove window, purged transfer hatch and locking RTP flange
Customization	Доступно в зависимости от предполагаемого применения и операционной среды.

Доступные варианты

Positive or negative pressure control, alternate RTP sizes, single-use beta-bag interfaces, vapor decontamination connections, oxygen control, glove leak testing, data logging and powered height adjustment.

Planning a Mobile Transfer Isolator specification?

Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.

Поговорите с нашей командой