Mobile transfer isolator with glove ports and blue rapid transfer interface

クリーンルーム材料の取り扱い · 貯蔵

Mobile 転送アイソレータ

A mobile hard-wall transfer isolator with HEPA filtration, glove access, rapid transfer port and battery-supported pressure control.

Hard-wall mobile barrier protects aseptic or contained transfers
Integrated glove ports, transfer hatch and rapid transfer interface
HEPA-filtered pressure control operates from mains or onboard battery

見積もりリクエスト製品案内

商品紹介

This compact isolator combines a welded stainless chamber, transparent glove window, purged side hatch and rapid transfer port on a height-adjustable mobile base. Independent supply and exhaust fans can establish the pressure mode selected for product or operator protection, while onboard low-voltage power supports controlled movement between processing stations.

主要な特徴

Dual HEPA air paths support controlled positive or negative pressure modes.

Two glove ports allow manipulation without opening the main chamber.

Purged transfer hatch reduces direct exchange with the surrounding room.

Alpha-style rapid transfer interface supports closed container docking.

Battery-powered lift and airflow improve mobility and docking alignment.

お客様の製品に関する懸念事項

Critical materials must move between equipment without exposing the chamber, product or operator to an uncontrolled open transfer.

Barrier loss during manipulationIntegrated gauntlets maintain separation while operators handle chamber contents.

Contamination entering through material loadingThe purged transfer hatch provides a staged entry path.

Opening an isolator for container transferThe locking RTP interface docks compatible beta containers without exposing mating faces.

Airflow interruption during relocationThe onboard battery supports fans and controls away from mains power.

典型的な用途

Aseptic component transfer, sterility-test support, closed sampling, cell-therapy material handling and contained movement of small process items.

技術的なパラメータ

The isolator chamber uses smooth internal radii, gasketed service openings and monitored fan/filter modules. Pressure setpoint, airflow mode, RTP diameter, glove material and decontamination provisions are selected for the intended aseptic or containment process.

コア材料	Type 316L stainless steel chamber with polycarbonate glazing, HEPA filters and elastomer glove sleeves
パネルの厚さ	30–50 mm hard-wall chamber and filter housing sections
有効幅	700–1200 mm usable working chamber width
最大長さ	Up to 1800 mm overall mobile system length
鋼鉄の厚さを直面する	1.5–2.0 mm
コア密度	8000 kg / m3 公称 316L ステンレス鋼の密度
熱伝導率	室温で約 14.6 W / （ m · K ）
表面仕上げ	Mechanically polished and passivated stainless steel with smooth internal radii
ジョイントタイプ	Seam-welded hard-wall chamber with gasketed glove window, purged transfer hatch and locking RTP flange
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Positive or negative pressure control, alternate RTP sizes, single-use beta-bag interfaces, vapor decontamination connections, oxygen control, glove leak testing, data logging and powered height adjustment.

Planning a Mobile Transfer Isolator specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する