English
Немецкий
Арабский язык
Французский
Индонезийский
Японский язык
Корейский
Японский
Португальский
Русский языкТекущий
Испанский язык
Тайский
Турецкий
Вьетнамский язык
Стенные и потолочные системы для чистых комнат
Внутренний 90-градусный угловой профиль чистого помещения
A square internal aluminum connector that aligns two modular cleanroom panels at 90 degrees where a compact corner is preferred over radiused coving.
- True square 90-degree geometry
- Dual panel-receiving channels
- Concealed mechanical fixing
- Compact internal corner footprint
Введение продукции
The Internal 90-Degree Cleanroom Corner Profile forms a rigid square junction between two perpendicular modular wall panels. Its L-shaped extrusion locates both panel edges, protects the cut interfaces and provides a controlled line for sealing. The compact geometry suits equipment alcoves, service spaces and partition layouts where a large hygienic cove would take up useful clearance. Anodized or powder-coated surfaces coordinate the connector with adjacent panels and simplify routine cleaning.
Основные характеристики
The profile covers raw panel edges inside the corner assembly.
Concealed screw paths keep primary fasteners away from the visible wall face.
A narrow corner footprint preserves space in compact rooms and recesses.
Continuous sealing lines can be applied at both panel-to-profile interfaces.
Обеспокоенность клиентов продуктами
A square internal junction must hold two panels accurately while hiding their cut edges and leaving a controlled sealing path.
Two free panel edges can drift out of square during assembly.The rigid L-shaped extrusion locates both edges in a defined 90-degree relationship.
Exposed sandwich-panel cut edges are difficult to finish neatly inside a corner.Twin receiving faces enclose the panel ends behind the aluminum profile.
Bulky rounded coving reduces clearance in narrow technical spaces.The compact square section retains more usable room at the junction.
An uneven corner gap makes a continuous sealant bead hard to apply.Straight extrusion edges establish consistent seal lines along both wall faces.
Типичные приложения
Cleanroom partition internal cornersEquipment and utility alcovesService corridor wall junctionsCompact laboratory enclosuresRetrofit modular wall returns
Технические параметры
This is a structural square-corner connector, not a radiused internal cove. Section dimensions are matched to the selected modular wall thickness.
| Основной материал | 6063-T5 extruded aluminum L-shaped corner connector |
|---|---|
| Толщина панели | 50, 75 or 100 mm compatible panel thickness |
| эффективная ширина | N/A — defined by two perpendicular panel-receiving channels |
| Максимальная длина | 6000 mm |
| Толщина линий стали | N/A — the connector is extruded aluminum |
| Плотность ядра | N/A — no insulated core; aluminum alloy density is approximately 2700 kg/m³ |
| Теплопроводимость | N/A — no insulated core; aluminum alloy is approximately 200 W/(m·K) |
| Поверхностная отделка | Anodized or polyester powder-coated aluminum |
| Объединенный тип | Internal 90-degree twin-channel connection with concealed screws and sealed edges |
| Customization | Доступно в зависимости от предполагаемого приложения и операционной среды |
Доступные варианты
Profile for 50 mm wall panelsProfile for 75 mm wall panelsProfile for 100 mm wall panelsAnodized or white powder-coated surface
Planning a Internal 90-Degree Cleanroom Corner Profile specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
