클린룸 벽 및 천장 시스템

내부 90 도 클린룸 모서리 프로파일

A square internal aluminum connector that aligns two modular cleanroom panels at 90 degrees where a compact corner is preferred over radiused coving.

True square 90-degree geometry
Dual panel-receiving channels
Concealed mechanical fixing
Compact internal corner footprint

견적 요청 제품 찾아보기

상품 소개

The Internal 90-Degree Cleanroom Corner Profile forms a rigid square junction between two perpendicular modular wall panels. Its L-shaped extrusion locates both panel edges, protects the cut interfaces and provides a controlled line for sealing. The compact geometry suits equipment alcoves, service spaces and partition layouts where a large hygienic cove would take up useful clearance. Anodized or powder-coated surfaces coordinate the connector with adjacent panels and simplify routine cleaning.

주요 기능

Perpendicular receiving faces hold adjoining panels at a consistent right angle.

The profile covers raw panel edges inside the corner assembly.

Concealed screw paths keep primary fasteners away from the visible wall face.

A narrow corner footprint preserves space in compact rooms and recesses.

Continuous sealing lines can be applied at both panel-to-profile interfaces.

고객 제품 관심사

A square internal junction must hold two panels accurately while hiding their cut edges and leaving a controlled sealing path.

Two free panel edges can drift out of square during assembly.The rigid L-shaped extrusion locates both edges in a defined 90-degree relationship.

Exposed sandwich-panel cut edges are difficult to finish neatly inside a corner.Twin receiving faces enclose the panel ends behind the aluminum profile.

Bulky rounded coving reduces clearance in narrow technical spaces.The compact square section retains more usable room at the junction.

An uneven corner gap makes a continuous sealant bead hard to apply.Straight extrusion edges establish consistent seal lines along both wall faces.

일반적인 응용 프로그램

Cleanroom partition internal cornersEquipment and utility alcovesService corridor wall junctionsCompact laboratory enclosuresRetrofit modular wall returns

기술 매개변수

This is a structural square-corner connector, not a radiused internal cove. Section dimensions are matched to the selected modular wall thickness.

핵심 재료	6063-T5 extruded aluminum L-shaped corner connector
패널 두께	50, 75 or 100 mm compatible panel thickness
유효 폭	N/A — defined by two perpendicular panel-receiving channels
최대 길이	6000 mm
강철 면면 두께	N/A — the connector is extruded aluminum
코어 밀도	N / A - 단열 코어 없음; 알루미늄 합금 밀도는 약 2700 kg / m 3 입니다.
열전도도 (Thermal Conductivity)	N / A - 단열 코어 없음; 알루미늄 합금 약 200 W / (m · K)
표면 마무리	Anodized or polyester powder-coated aluminum
접합 유형	Internal 90-degree twin-channel connection with concealed screws and sealed edges
사용자 정의	사용 대상 어플리케이션 및 운영 환경에 따라 사용 가능

사용 가능한 옵션

Profile for 50 mm wall panelsProfile for 75 mm wall panelsProfile for 100 mm wall panelsAnodized or white powder-coated surface

Planning a Internal 90-Degree Cleanroom Corner Profile specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.