クリーンルームの壁と天井システム

内部 90 度のクリーンルームのコーナープロファイル

A square internal aluminum connector that aligns two modular cleanroom panels at 90 degrees where a compact corner is preferred over radiused coving.

True square 90-degree geometry
Dual panel-receiving channels
Concealed mechanical fixing
Compact internal corner footprint

見積もりリクエスト製品案内

商品紹介

The Internal 90-Degree Cleanroom Corner Profile forms a rigid square junction between two perpendicular modular wall panels. Its L-shaped extrusion locates both panel edges, protects the cut interfaces and provides a controlled line for sealing. The compact geometry suits equipment alcoves, service spaces and partition layouts where a large hygienic cove would take up useful clearance. Anodized or powder-coated surfaces coordinate the connector with adjacent panels and simplify routine cleaning.

主要な特徴

Perpendicular receiving faces hold adjoining panels at a consistent right angle.

The profile covers raw panel edges inside the corner assembly.

Concealed screw paths keep primary fasteners away from the visible wall face.

A narrow corner footprint preserves space in compact rooms and recesses.

Continuous sealing lines can be applied at both panel-to-profile interfaces.

お客様の製品に関する懸念事項

A square internal junction must hold two panels accurately while hiding their cut edges and leaving a controlled sealing path.

Two free panel edges can drift out of square during assembly.The rigid L-shaped extrusion locates both edges in a defined 90-degree relationship.

Exposed sandwich-panel cut edges are difficult to finish neatly inside a corner.Twin receiving faces enclose the panel ends behind the aluminum profile.

Bulky rounded coving reduces clearance in narrow technical spaces.The compact square section retains more usable room at the junction.

An uneven corner gap makes a continuous sealant bead hard to apply.Straight extrusion edges establish consistent seal lines along both wall faces.

典型的な用途

Cleanroom partition internal cornersEquipment and utility alcovesService corridor wall junctionsCompact laboratory enclosuresRetrofit modular wall returns

技術的なパラメータ

This is a structural square-corner connector, not a radiused internal cove. Section dimensions are matched to the selected modular wall thickness.

コア材料	6063-T5 extruded aluminum L-shaped corner connector
パネルの厚さ	50, 75 or 100 mm compatible panel thickness
有効幅	N/A — defined by two perpendicular panel-receiving channels
最大長さ	6000 mm
鋼鉄の厚さを直面する	N/A — the connector is extruded aluminum
コア密度	N / A— 絶縁コアなし、アルミニウム合金密度は約 2700 kg / m3 です。
熱伝導率	N / A— 絶縁コアなし；アルミニウム合金は約 200 W / （ m · K ）
表面仕上げ	Anodized or polyester powder-coated aluminum
ジョイントタイプ	Internal 90-degree twin-channel connection with concealed screws and sealed edges
カスタマイズ	目的のアプリケーションおよび動作環境に基づいて利用可能

利用可能なオプション

Profile for 50 mm wall panelsProfile for 75 mm wall panelsProfile for 100 mm wall panelsAnodized or white powder-coated surface

Planning a Internal 90-Degree Cleanroom Corner Profile specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する