English
Немецкий
Арабский язык
Французский
Индонезийский
Японский язык
Корейский
Японский
Португальский
Русский языкТекущий
Испанский язык
Тайский
Турецкий
Вьетнамский язык
Запчасти для оборудования для чистых помещений
FFU Fan Impeller
A balanced backward-curved centrifugal wheel that replaces a damaged or contaminated FFU impeller while retaining the existing motor and housing.
- Backward-Curved Blades
- Low-Profile FFU Geometry
- Balanced Rotating Assembly
- Matched Hub Interface
Введение продукции
The FFU fan impeller converts motor rotation into the pressure and airflow required to move room air through the final filter. Its shallow centrifugal geometry suits the limited plenum depth of a ceiling-mounted fan filter unit. Backward-curved blades, a formed inlet rim and a rigid backplate guide air through the wheel while limiting recirculation. Replacement selection must match the original outside diameter, wheel depth, rotation direction, hub bore and motor speed so the assembled fan operates within its intended airflow range.
Основные характеристики
A shallow wheel profile fits compact ceiling FFU housings without obstructing the inlet path.
The formed rim and rigid backplate retain blade spacing during high-speed rotation.
Machined hub options match common direct-drive motor shafts and fastening methods.
Обеспокоенность клиентов продуктами
Impeller geometry and balance directly affect FFU airflow, sound and motor loading.
A wheel with the wrong diameter or depth changes the fan operating point.Replacement dimensions are matched to the original wheel envelope and FFU inlet clearance.
Incorrect blade direction produces weak airflow and excessive turbulence.Clockwise or counter-clockwise blade orientation is selected for the installed motor rotation.
Hub mismatch causes runout or prevents secure shaft attachment.Bore, keyway, set-screw and bolt pattern options are configured for the original drive shaft.
An unbalanced replacement transmits vibration to the filter and ceiling grid.The completed wheel is balanced as a rotating assembly after blade and hub fabrication.
Типичные приложения
Cleanroom ceiling fan filter unitsLaminar-flow workstationsMini-environment circulation modulesFFU preventive-maintenance replacement
Технические параметры
Typical construction ranges for low-profile FFU centrifugal impellers are shown below.
| Основной материал | Formed aluminum alloy or galvanized-steel backward-curved blade assembly |
|---|---|
| Толщина панели | 60-180 mm nominal wheel depth |
| эффективная ширина | 250-500 mm nominal outside diameter |
| Максимальная длина | Up to 500 mm overall impeller diameter |
| Толщина линий стали | 0.8-1.5 mm formed sheet-metal blades and backplate |
| Плотность ядра | 2700 kg/m³ for aluminum or 7850 kg/m³ for steel components |
| Теплопроводимость | 160-205 W/(m·K) for aluminum or 45-60 W/(m·K) for steel |
| Поверхностная отделка | Natural aluminum or corrosion-resistant zinc-coated silver finish |
| Объединенный тип | Formed blade tabs or welded blade roots with machined bolted or set-screw hub |
| Customization | Доступно в зависимости от предполагаемого применения и операционной среды. |
Доступные варианты
Aluminum or galvanized-steel constructionClockwise or counter-clockwise rotationCustom hub bore and fasteningMatched diameter and wheel depth
Planning a FFU Fan Impeller specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
