Englisch
DeutschCurrent
Arabisch
Französisch
indonesisch
Japanisch
Koreanisch
Malaiisch
Portugiesisch
Russisch
Spanisch
Thailändisch
Türkischer Sprache
Vietnamesisch
Cleanroom Equipment Ersatzteile
FFU Fan Impeller
A balanced backward-curved centrifugal wheel that replaces a damaged or contaminated FFU impeller while retaining the existing motor and housing.
- Backward-Curved Blades
- Low-Profile FFU Geometry
- Balanced Rotating Assembly
- Matched Hub Interface
Produkteinführung
The FFU fan impeller converts motor rotation into the pressure and airflow required to move room air through the final filter. Its shallow centrifugal geometry suits the limited plenum depth of a ceiling-mounted fan filter unit. Backward-curved blades, a formed inlet rim and a rigid backplate guide air through the wheel while limiting recirculation. Replacement selection must match the original outside diameter, wheel depth, rotation direction, hub bore and motor speed so the assembled fan operates within its intended airflow range.
Key Features
A shallow wheel profile fits compact ceiling FFU housings without obstructing the inlet path.
The formed rim and rigid backplate retain blade spacing during high-speed rotation.
Machined hub options match common direct-drive motor shafts and fastening methods.
Kunden Produktbedenken
Impeller geometry and balance directly affect FFU airflow, sound and motor loading.
A wheel with the wrong diameter or depth changes the fan operating point.Replacement dimensions are matched to the original wheel envelope and FFU inlet clearance.
Incorrect blade direction produces weak airflow and excessive turbulence.Clockwise or counter-clockwise blade orientation is selected for the installed motor rotation.
Hub mismatch causes runout or prevents secure shaft attachment.Bore, keyway, set-screw and bolt pattern options are configured for the original drive shaft.
An unbalanced replacement transmits vibration to the filter and ceiling grid.The completed wheel is balanced as a rotating assembly after blade and hub fabrication.
Typische Anwendungen
Cleanroom ceiling fan filter unitsLaminar-flow workstationsMini-environment circulation modulesFFU preventive-maintenance replacement
Technische Parameter
Typical construction ranges for low-profile FFU centrifugal impellers are shown below.
| Core Material | Formed aluminum alloy or galvanized-steel backward-curved blade assembly |
|---|---|
| Panel Dicke | 60-180 mm nominal wheel depth |
| Effektive Breite | 250-500 mm nominal outside diameter |
| Maximale Länge | Up to 500 mm overall impeller diameter |
| Stahl facing Dicke | 0.8-1.5 mm formed sheet-metal blades and backplate |
| Kerndichte | 2700 kg/m³ for aluminum or 7850 kg/m³ for steel components |
| Thermische Leitfähigkeit | 160-205 W/(m·K) for aluminum or 45-60 W/(m·K) for steel |
| Oberfläche Finish | Natural aluminum or corrosion-resistant zinc-coated silver finish |
| Gemeinsamer Typ | Formed blade tabs or welded blade roots with machined bolted or set-screw hub |
| Customisierung | Verfügbar je nach beabsichtigter Anwendung und Betriebsumgebung. |
Verfügbare Optionen
Aluminum or galvanized-steel constructionClockwise or counter-clockwise rotationCustom hub bore and fasteningMatched diameter and wheel depth
Planning a FFU Fan Impeller specification?
Senden Sie uns Ihre Abmessungen, Installationsbedingungen, Leistungsziele und gewünschte Oberflächenveredelung.
