English
Немецкий
Арабский язык
Французский
Индонезийский
Японский язык
Корейский
Японский
Португальский
Русский языкТекущий
Испанский язык
Тайский
Турецкий
Вьетнамский язык
Системы контроля за чистыми помещениями и экологического мониторинга
Датчик статического давления в трубопроводе
A static-pressure pickup and transmitter package that measures cleanroom duct pressure without directly sensing the moving-air velocity head.
- Static Pressure Pickup
- Low-Range Signal Output
- Fan Control Feedback
- Sealed Duct Mounting
Введение продукции
The duct static pressure sensor combines a properly oriented wall pickup with a low-pressure transmitter. The pickup opening is arranged to minimize direct exposure to velocity pressure, allowing the transmitter to represent duct static condition. A flexible tube connects the pickup to the protected electronics outside the duct. The resulting analog or digital signal supports supply-fan control, high-pressure alarm and diagnosis of restricted or undersupplied duct sections.
Основные характеристики
Low-pressure signal conditioning produces a stable control value for variable-speed fans.
The transmitter stays outside the duct for accessible wiring and zero service.
Selectable ranges match branch, main-duct and plenum pressure applications.
Обеспокоенность клиентов продуктами
Static pressure readings are easily biased when the pickup faces the flow, leaks at the duct wall or sits in highly turbulent air.
The pickup captures velocity pressure and reports an artificially high value.A static tip or flush wall port samples perpendicular to the airflow direction.
Air leaks around the mounting hole distort the low-pressure signal.A gasketed flange seals the duct penetration around the pickup.
The fan control signal is noisy after a bend or damper.Appropriate location and transmitter filtering reduce turbulence-driven variation.
Zero calibration requires entry into the duct.The external transmitter provides accessible zero controls and removable tubing.
Типичные приложения
AHU fan static-pressure controlCleanroom supply manifoldsReturn and exhaust plenumsDuct high-pressure alarms
Технические параметры
Typical materials and dimensions for a duct static pressure sensor package are shown below.
| Основной материал | 304 stainless static pickup with silicone tubing and flame-retardant polymer pressure transmitter |
|---|---|
| Толщина панели | 45-80 mm transmitter depth |
| эффективная ширина | 90-150 mm transmitter width |
| Максимальная длина | Static probes up to 250 mm |
| Толщина линий стали | 0.5-0.8 mm 304 stainless pressure pickup |
| Плотность ядра | 7900-8030 kg/m³ for stainless sensing parts |
| Теплопроводимость | 14-17 W/(m·K) for 304 stainless steel pickup |
| Поверхностная отделка | Satin stainless pickup with light-gray transmitter and blue pressure label |
| Объединенный тип | Gasketed duct flange, barbed pressure tube and removable electrical terminal |
| Customization | Доступно в зависимости от предполагаемого применения и операционной среды. |
Доступные варианты
Flush or insertion pickupVoltage or 4-20 mA outputSelectable pressure rangesLocal LCD
Planning a Duct Static Pressure Sensor specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
