Complete duct static pressure sensor with stainless pickup, clear tubing and gray transmitter

Sistem Kawalan Bilik Bersih dan Pemantauan Alam Sekitar

Sensor Tekanan Statik Saluran

A static-pressure pickup and transmitter package that measures cleanroom duct pressure without directly sensing the moving-air velocity head.

Static Pressure Pickup
Low-Range Signal Output
Fan Control Feedback
Sealed Duct Mounting

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

The duct static pressure sensor combines a properly oriented wall pickup with a low-pressure transmitter. The pickup opening is arranged to minimize direct exposure to velocity pressure, allowing the transmitter to represent duct static condition. A flexible tube connects the pickup to the protected electronics outside the duct. The resulting analog or digital signal supports supply-fan control, high-pressure alarm and diagnosis of restricted or undersupplied duct sections.

Ciri-ciri Utama

A flush or shielded pickup reduces influence from the moving-air velocity component.

Low-pressure signal conditioning produces a stable control value for variable-speed fans.

The transmitter stays outside the duct for accessible wiring and zero service.

Selectable ranges match branch, main-duct and plenum pressure applications.

Kebimbangan Produk Pelanggan

Static pressure readings are easily biased when the pickup faces the flow, leaks at the duct wall or sits in highly turbulent air.

The pickup captures velocity pressure and reports an artificially high value.A static tip or flush wall port samples perpendicular to the airflow direction.

Air leaks around the mounting hole distort the low-pressure signal.A gasketed flange seals the duct penetration around the pickup.

The fan control signal is noisy after a bend or damper.Appropriate location and transmitter filtering reduce turbulence-driven variation.

Zero calibration requires entry into the duct.The external transmitter provides accessible zero controls and removable tubing.

Permohonan yang biasa

AHU fan static-pressure controlCleanroom supply manifoldsReturn and exhaust plenumsDuct high-pressure alarms

Parameter teknikal

Typical materials and dimensions for a duct static pressure sensor package are shown below.

Bahan Teras	304 stainless static pickup with silicone tubing and flame-retardant polymer pressure transmitter
Ketebalan Panel	45-80 mm transmitter depth
Lebar berkesan	90-150 mm transmitter width
Panjang maksimum	Static probes up to 250 mm
Keluli Menghadapi Ketebalan	0.5-0.8 mm 304 stainless pressure pickup
Ketumpatan teras	7900-8030 kg/m³ for stainless sensing parts
Kekonduksian Terma	14-17 W/(m·K) for 304 stainless steel pickup
Kemasan permukaan	Satin stainless pickup with light-gray transmitter and blue pressure label
Jenis Bersatu	Gasketed duct flange, barbed pressure tube and removable electrical terminal
Penyesuaian	Boleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi.

Pilihan yang boleh didapati

Flush or insertion pickupVoltage or 4-20 mA outputSelectable pressure rangesLocal LCD

Planning a Duct Static Pressure Sensor specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami