English
Немецкий
Арабский язык
Французский
Индонезийский
Японский язык
Корейский
Японский
Португальский
Русский языкТекущий
Испанский язык
Тайский
Турецкий
Вьетнамский язык
Запчасти для оборудования для чистых помещений
Дамперный приводной механизм
A compact direct-coupled rotary actuator that positions a matched AHU or ventilation damper through its shaft without a separate linkage assembly.
- Direct Shaft Coupling
- Visible 0-90 Degree Scale
- Manual Override Button
- Anti-Rotation Bracket
Введение продукции
The damper actuator mounts directly on a round or square damper shaft and converts an electrical control command into controlled quarter-turn movement. A split universal clamp transfers torque to the shaft, while the separate anti-rotation bracket prevents the actuator body from turning with the drive. The visible angle scale supports setup checks, and the external manual-override control allows the coupling to be positioned when the selected model and operating instructions permit. Shaft geometry, required torque, rotation direction, supply voltage and signal type must all correspond with the installed damper and controller.
Основные характеристики
The separate slotted anti-rotation bracket restrains the housing while allowing practical mounting adjustment.
A clearly marked angle scale and external override control support setup and service checks at the actuator.
A gland-protected multi-core lead keeps power and control conductors together for orderly equipment wiring.
Обеспокоенность клиентов продуктами
Dependable damper positioning requires the actuator torque, shaft interface and electrical control method to be selected as one compatible assembly.
An undersized actuator may stall before a large or tightly sealed damper reaches its commanded position.Required torque is assessed from damper area, seal friction, blade arrangement and the manufacturer's sizing allowance before the actuator is selected.
A replacement with the wrong control signal cannot follow the existing controller output.Supply voltage and on/off, floating or proportional input are matched to the installed control sequence and wiring.
An incompatible or poorly tightened clamp can slip on the shaft and lose blade position.Shaft shape, diameter, insertion length and clamp range are verified together, then secured with the specified fastening method.
Limited clearance or an incorrect restraint point can make the housing rotate or obstruct service access.The actuator orientation and anti-rotation bracket position are configured around the available AHU panel and shaft location.
Типичные приложения
AHU outdoor- and return-air dampersMixing and recirculation dampersVAV terminal and zone dampersVentilation isolation and control dampers
Технические параметры
Typical construction and dimensional ranges for compact direct-coupled rotary damper actuators are listed below.
| Основной материал | Durable engineering-polymer enclosure with copper-wound motor and steel gear and drive components |
|---|---|
| Толщина панели | 45-90 mm nominal actuator enclosure depth |
| эффективная ширина | 60-130 mm nominal actuator body width |
| Максимальная длина | Up to 260 mm overall body and anti-rotation bracket envelope |
| Толщина линий стали | 1.5-4.0 mm zinc-plated steel clamp and bracket section thickness |
| Плотность ядра | Approximately 1100-1500 kg/m³ for the engineering-polymer enclosure |
| Теплопроводимость | Approximately 0.20-0.35 W/(m·K) for the engineering-polymer enclosure |
| Поверхностная отделка | Matte black molded housing with zinc-plated silver shaft clamp and bracket, black cable and color-coded conductors |
| Объединенный тип | Direct-coupled split shaft clamp with adjustable anti-rotation bracket and gland-protected wired connection |
| Customization | Доступно в зависимости от предполагаемого применения и операционной среды. |
Доступные варианты
On/off, floating or proportional controlMatched 24 V or line-voltage configurationNon-spring-return or spring-return operationAuxiliary switch and feedback options
Planning a Damper Actuator specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
