English
Немецкий
Арабский язык
Французский
Индонезийский
Японский язык
Корейский
Японский
Португальский
Русский языкТекущий
Испанский язык
Тайский
Турецкий
Вьетнамский язык
Одежда для чистых комнат, ИПП и расходные материалы
Чистый комната Wipe Dispenser
Clear high-impact PETG cleanroom wipe dispenser with an enclosed single compartment, hinged refill lid, slanted feed floor and wall-mount keyhole tabs.
- Clear enclosed bin keeps the remaining wipe supply visible
- Hinged refill lid limits open handling during replenishment
- Slanted interior floor guides folded wipes toward the front access cutout
Введение продукции
The Cleanroom Wipe Dispenser provides a defined location for folded dry wipers at a gowning bench, cleaning station or controlled-area entry. Its transparent PETG housing allows a quick stock check without opening the bin, while the top lid gives refill access and closes over the stored stack. A sloped internal floor advances wipes toward the broad front cutout, where gloved users can remove one sheet without reaching deeply into the supply.
Основные характеристики
Enclosed top shields folded wipes from casual splash and settling debris
Wide radiused opening accommodates gloved single-sheet retrieval
Rear keyhole tabs permit compact wall placement above a work surface
Smooth bonded panels and polished edges simplify routine wipe-down
Обеспокоенность клиентов продуктами
A wipe dispenser must balance quick access with protection of the unused stack. Incorrect wipe size, an overfilled bin or an incompatible cleaner can impair feeding or damage a clear thermoplastic housing.
Folded wipes may bind instead of moving toward the access opening.Match the compartment footprint to the folded wipe and retain clearance around the stack.
The remaining supply can be exposed when the lid is left open after loading.Use the hinged lid for replenishment and close it before returning the station to service.
Strong solvents may haze or stress-crack transparent sheet material.Confirm cleaning-agent compatibility with the selected PETG grade and use a low-residue method.
An overloaded wall bracket can distort the housing or loosen the mounting point.Select fasteners for the wall construction and verify secure engagement of both keyhole tabs.
Типичные приложения
For cleanroom gowning areas, semiconductor wet-clean stations, pharmaceutical support rooms, medical-device assembly spaces, optics laboratories and controlled manufacturing cells that use folded dry wipers.
Технические параметры
The following ranges describe a single-compartment transparent PETG dispenser for folded cleanroom wipers. Housing dimensions, access geometry and mounting details can be adapted to the wipe format and available wall or benchtop space.
| Основной материал | Clear high-impact PETG sheet with a slanted PETG feed floor |
|---|---|
| Толщина панели | 3.0 mm nominal PETG sheet |
| эффективная ширина | 267-305 mm nominal dispenser width |
| Максимальная длина | 305 mm maximum standard longest dimension |
| Толщина линий стали | 0 mm; no steel facing on the transparent dispenser |
| Плотность ядра | Approximately 1270 kg/m³ for clear PETG sheet |
| Теплопроводимость | Approximately 0.22 W/(m·K) for PETG sheet |
| Поверхностная отделка | Crystal-clear smooth faces with polished transparent edges |
| Объединенный тип | Line-bent and bonded PETG seams with dual-hinge lid and keyhole wall tabs |
| Customization | Доступно в зависимости от предполагаемого применения и операционной среды. |
Доступные варианты
Enclosed-lid or open-bin access configurationWall-mounted or benchtop placementCompartment size for 9 x 9 inch or 12 x 12 inch folded wipesClear PETG, clear acrylic or static-dissipative transparent PVC constructionCustom front cutout width and internal floor angleSingle or multiple dispensing compartments
Planning a Cleanroom Wipe Dispenser specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
