Anglais
Allemand
Arabe
FrançaisCurrent
Indonésien
Japonais
Coréen
Le malais
Le portugais
russe
espagnol
Thaïlandais
Le turc
Le vietnamien
Vêtements de salle blanche, EPI et consommables
Cleanroom Essuyer Dispenser
Clear high-impact PETG cleanroom wipe dispenser with an enclosed single compartment, hinged refill lid, slanted feed floor and wall-mount keyhole tabs.
- Clear enclosed bin keeps the remaining wipe supply visible
- Hinged refill lid limits open handling during replenishment
- Slanted interior floor guides folded wipes toward the front access cutout
Introduction de produit
The Cleanroom Wipe Dispenser provides a defined location for folded dry wipers at a gowning bench, cleaning station or controlled-area entry. Its transparent PETG housing allows a quick stock check without opening the bin, while the top lid gives refill access and closes over the stored stack. A sloped internal floor advances wipes toward the broad front cutout, where gloved users can remove one sheet without reaching deeply into the supply.
Key Features
Enclosed top shields folded wipes from casual splash and settling debris
Wide radiused opening accommodates gloved single-sheet retrieval
Rear keyhole tabs permit compact wall placement above a work surface
Smooth bonded panels and polished edges simplify routine wipe-down
Préoccupations du client produit
A wipe dispenser must balance quick access with protection of the unused stack. Incorrect wipe size, an overfilled bin or an incompatible cleaner can impair feeding or damage a clear thermoplastic housing.
Folded wipes may bind instead of moving toward the access opening.Match the compartment footprint to the folded wipe and retain clearance around the stack.
The remaining supply can be exposed when the lid is left open after loading.Use the hinged lid for replenishment and close it before returning the station to service.
Strong solvents may haze or stress-crack transparent sheet material.Confirm cleaning-agent compatibility with the selected PETG grade and use a low-residue method.
An overloaded wall bracket can distort the housing or loosen the mounting point.Select fasteners for the wall construction and verify secure engagement of both keyhole tabs.
Les applications typiques
For cleanroom gowning areas, semiconductor wet-clean stations, pharmaceutical support rooms, medical-device assembly spaces, optics laboratories and controlled manufacturing cells that use folded dry wipers.
Paramètres techniques
The following ranges describe a single-compartment transparent PETG dispenser for folded cleanroom wipers. Housing dimensions, access geometry and mounting details can be adapted to the wipe format and available wall or benchtop space.
| Matériaux de base | Clear high-impact PETG sheet with a slanted PETG feed floor |
|---|---|
| Panneau épaisseur | 3.0 mm nominal PETG sheet |
| Largeur effective | 267-305 mm nominal dispenser width |
| Longueur maximale | 305 mm maximum standard longest dimension |
| Acier face épaisseur | 0 mm; no steel facing on the transparent dispenser |
| Densité Core | Approximately 1270 kg/m³ for clear PETG sheet |
| Conductivité thermique | Approximately 0.22 W/(m·K) for PETG sheet |
| surface finie | Crystal-clear smooth faces with polished transparent edges |
| Type joint | Line-bent and bonded PETG seams with dual-hinge lid and keyhole wall tabs |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation. |
Options disponibles
Enclosed-lid or open-bin access configurationWall-mounted or benchtop placementCompartment size for 9 x 9 inch or 12 x 12 inch folded wipesClear PETG, clear acrylic or static-dissipative transparent PVC constructionCustom front cutout width and internal floor angleSingle or multiple dispensing compartments
Planning a Cleanroom Wipe Dispenser specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
