English
Немецкий
Арабский язык
Французский
Индонезийский
Японский язык
Корейский
Японский
Португальский
Русский языкТекущий
Испанский язык
Тайский
Турецкий
Вьетнамский язык
Обработка и хранение материалов в чистых помещениях
Вакуумный подъемник для чистых помещений
A stainless cleanroom vacuum lifter with four silicone suction cups, enclosed overhead drive and pendant control for ergonomic handling of smooth sealed loads.
- Four-cup vacuum frame distributes holding force across smooth loads
- Stainless construction presents cleanable controlled-area surfaces
- Powered lift and pendant control reduce manual handling strain
Введение продукции
The cleanroom vacuum lifter combines a trolley-mounted enclosed lifting unit with a rigid stainless spreader and four compliant suction cups. A clean-compatible blue belt raises the vacuum head while the pendant controls vertical movement. Stainless external surfaces, accessible joints and replaceable cup components support cleaning and maintenance in controlled production spaces.
Основные характеристики
Stainless external frame and suspension components resist cleaning agents.
Enclosed overhead drive keeps moving components away from the load.
Compliant silicone cups accommodate small surface variation.
Pendant control supports deliberate pick, lift and placement sequences.
Обеспокоенность клиентов продуктами
Large smooth loads can be awkward to grip manually, while conventional lifting frames may introduce painted surfaces, exposed abrasion points or difficult-to-clean joints.
Uneven holding forceFour spaced cups distribute vacuum contact across the workpiece.
Operator fatiguePowered vertical motion reduces repeated manual lifting effort.
CleanabilityStainless external surfaces and removable cup components simplify access for cleaning.
Unexpected vacuum lossConfigurable monitoring, check valves and controlled-lowering functions can be selected for the risk assessment.
Типичные приложения
Assisted transfer of smooth drums, sealed containers, sheet components, panels and packaged process materials in pharmaceutical, biotechnology, medical-device, food and electronics clean areas.
Технические параметры
Vacuum is distributed from the central suspension assembly to four cup mounts positioned near the spreader corners. The lifting drive carries the complete vacuum head independently of the vacuum circuit. Cup material, frame dimensions, vacuum source, filtration, monitoring and safe-load behavior are selected for the workpiece surface and process risk. Suitability must be confirmed using the actual load geometry and porosity.
| Основной материал | 304 or 316L stainless steel frame with clean-compatible silicone suction cups |
|---|---|
| Толщина панели | 2.0–4.0 mm hoist enclosure panels |
| эффективная ширина | 400–1600 mm configurable suction frame width |
| Максимальная длина | Up to 2500 mm configurable spreader length |
| Толщина линий стали | 1.5–3.0 mm external stainless covers |
| Плотность ядра | 8000 kg/m³ nominal stainless steel density |
| Теплопроводимость | Approximately 14.6–16.2 W/(m·K) at room temperature |
| Поверхностная отделка | Fine-brushed, mechanically polished or electropolished stainless steel |
| Объединенный тип | Trolley-mounted belt lift with central swivel suspension and four adjustable vacuum cup mounts |
| Customization | Доступно в зависимости от предполагаемого применения и операционной среды. |
Доступные варианты
304 or 316L stainless steel, alternative cup materials and diameters, adjustable cup spacing, remote vacuum pump, inline filter, vacuum reservoir, low-vacuum alarm, powered trolley, variable lifting speed and workpiece-specific pick heads.
Planning a Cleanroom Vacuum Lifter specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
