Complete cleanroom vacuum lifter with four blue suction cups in three-quarter view

클린룸 재료 취급 및 보관

클린룸 진공 리프트

A stainless cleanroom vacuum lifter with four silicone suction cups, enclosed overhead drive and pendant control for ergonomic handling of smooth sealed loads.

Four-cup vacuum frame distributes holding force across smooth loads
Stainless construction presents cleanable controlled-area surfaces
Powered lift and pendant control reduce manual handling strain

견적 요청 제품 찾아보기

상품 소개

The cleanroom vacuum lifter combines a trolley-mounted enclosed lifting unit with a rigid stainless spreader and four compliant suction cups. A clean-compatible blue belt raises the vacuum head while the pendant controls vertical movement. Stainless external surfaces, accessible joints and replaceable cup components support cleaning and maintenance in controlled production spaces.

주요 기능

Four-cup spreader stabilizes broad smooth workpieces.

Stainless external frame and suspension components resist cleaning agents.

Enclosed overhead drive keeps moving components away from the load.

Compliant silicone cups accommodate small surface variation.

Pendant control supports deliberate pick, lift and placement sequences.

고객 제품 관심사

Large smooth loads can be awkward to grip manually, while conventional lifting frames may introduce painted surfaces, exposed abrasion points or difficult-to-clean joints.

Uneven holding forceFour spaced cups distribute vacuum contact across the workpiece.

Operator fatiguePowered vertical motion reduces repeated manual lifting effort.

청소 가능Stainless external surfaces and removable cup components simplify access for cleaning.

Unexpected vacuum lossConfigurable monitoring, check valves and controlled-lowering functions can be selected for the risk assessment.

일반적인 응용 프로그램

Assisted transfer of smooth drums, sealed containers, sheet components, panels and packaged process materials in pharmaceutical, biotechnology, medical-device, food and electronics clean areas.

기술 매개변수

Vacuum is distributed from the central suspension assembly to four cup mounts positioned near the spreader corners. The lifting drive carries the complete vacuum head independently of the vacuum circuit. Cup material, frame dimensions, vacuum source, filtration, monitoring and safe-load behavior are selected for the workpiece surface and process risk. Suitability must be confirmed using the actual load geometry and porosity.

핵심 재료	304 or 316L stainless steel frame with clean-compatible silicone suction cups
패널 두께	2.0–4.0 mm hoist enclosure panels
유효 폭	400–1600 mm configurable suction frame width
최대 길이	Up to 2500 mm configurable spreader length
강철 면면 두께	1.5–3.0 mm external stainless covers
코어 밀도	8000 kg / m 3 명칭 스테인레스 강철 밀도
열전도도 (Thermal Conductivity)	약 14. 6 - 16. 2 W / (m · K) 실온에서
표면 마무리	미세 브러시, 기계 연마 또는 전기 연마 스테인레스 스틸
접합 유형	Trolley-mounted belt lift with central swivel suspension and four adjustable vacuum cup mounts
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

304 or 316L stainless steel, alternative cup materials and diameters, adjustable cup spacing, remote vacuum pump, inline filter, vacuum reservoir, low-vacuum alarm, powered trolley, variable lifting speed and workpiece-specific pick heads.

Planning a Cleanroom Vacuum Lifter specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.