Three-quarter view of a blue cleanroom protective film roll with a broad sheet unrolled

Аксессуары для установки в чистых помещениях

Защитная пленка для чистых помещений

A translucent blue low-tack polyethylene film that temporarily shields stainless steel and coated cleanroom surfaces from scratches, dust and handling marks.

55-80 Micrometre PE Film
Low-Tack Easy-Peel Adhesive
Widths up to 2600 mm
Blue Translucent Surface Identification

Запрос котировки Просмотреть продукты

Введение продукции

This cleanroom protective film is supplied as one wide roll of translucent blue polyethylene carrier coated with a removable pressure-sensitive adhesive. It is intended for temporary lamination onto clean, dry stainless steel, aluminium, glass or coated panel faces before fabrication, transport and fit-out work. The visible blue tint makes protected areas easy to identify without printed branding, while the broad roll format suits doors, wall panels, ceiling components and equipment skins. Adhesive strength can be selected for smooth, brushed or lightly textured substrates so the film stays in place during handling yet can be peeled away after installation.

Основные характеристики

A broad flexible polyethylene carrier follows sheet-metal forming and panel handling without behaving like narrow packaging tape.

The removable pressure-sensitive adhesive provides temporary surface contact and is selected to limit residue on the specified finish.

Translucent blue coloration distinguishes covered areas while still allowing the underlying surface outline to remain visible.

Straight, clean roll edges support uniform machine or hand lamination across wide cleanroom components.

Moisture-resistant PE backing keeps dust, fingerprints and light abrasion away from the finished face during ordinary indoor logistics.

Обеспокоенность клиентов продуктами

Finished cleanroom components can collect scratches, grinding dust, fingerprints and installation marks after their final surface treatment but before room handover.

Brushed or polished stainless steel can be marked by tools, pallets and adjacent parts during fabrication and transport.The continuous PE carrier creates a sacrificial surface that absorbs light handling abrasion before the film is removed.

An adhesive that is too weak can lift at edges, while an aggressive grade can leave residue on a finished panel.Adhesive level is matched to the substrate texture and expected dwell time rather than using one universal tack.

Clear unprinted film may be difficult for installers to see, causing protected and exposed areas to be confused.The translucent blue tint makes the coverage boundary visible without introducing product labels or decorative printing.

Narrow tape requires many overlapping strips and can leave exposed gaps on large doors or wall panels.Wide roll formats cover broad components in fewer passes and maintain one continuous protective sheet.

Типичные приложения

Stainless steel cleanroom door and frame surfacesPowder-coated modular wall and ceiling panelsPass box, air-shower and equipment cabinet skinsAluminium trim and glazed partition componentsTemporary protection during fabrication, shipment and site installation

Технические параметры

The values below describe the selected translucent blue low-tack PE surface-protection roll shown in the product images.

Основной материал	Translucent blue polyethylene carrier with removable acrylic pressure-sensitive adhesive on a cardboard roll core
Толщина панели	0.055-0.080 mm total film-and-adhesive thickness
эффективная ширина	250-2600 mm roll width
Максимальная длина	Up to 200000 mm per standard converting roll
Толщина линий стали	0 mm; the protective roll has no steel facing
Плотность ядра	Approximately 920-930 kg/m³ for the polyethylene carrier
Теплопроводимость	Approximately 0.33 W/(m·K) at 23°C for LDPE
Поверхностная отделка	Smooth translucent blue PE outer face with a low-tack removable adhesive reverse
Объединенный тип	Pressure-sensitive lamination with straight-cut butt or controlled overlap seams
Customization	Доступно в зависимости от предполагаемого применения и операционной среды.

Доступные варианты

Transparent, translucent blue, white or black-and-white carrier colorsLow, medium or higher temporary adhesion levels for different surface texturesFactory-slit roll widths from 250 mm to 2600 mmAlternative 25-120 micrometre process-film thicknessesEasy-peel and forming-grade constructions for fabrication lines

Planning a Cleanroom Protective Film specification?

Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.

Поговорите с нашей командой