Three-quarter view of a blue cleanroom protective film roll with a broad sheet unrolled

Aksesoris Instalasi Cleanroom

Film pelindung kamar bersih

A translucent blue low-tack polyethylene film that temporarily shields stainless steel and coated cleanroom surfaces from scratches, dust and handling marks.

55-80 Micrometre PE Film
Low-Tack Easy-Peel Adhesive
Widths up to 2600 mm
Blue Translucent Surface Identification

Permintaan untuk kutipan Browse Produk

Perkenalan produk

This cleanroom protective film is supplied as one wide roll of translucent blue polyethylene carrier coated with a removable pressure-sensitive adhesive. It is intended for temporary lamination onto clean, dry stainless steel, aluminium, glass or coated panel faces before fabrication, transport and fit-out work. The visible blue tint makes protected areas easy to identify without printed branding, while the broad roll format suits doors, wall panels, ceiling components and equipment skins. Adhesive strength can be selected for smooth, brushed or lightly textured substrates so the film stays in place during handling yet can be peeled away after installation.

Fitur utama:

A broad flexible polyethylene carrier follows sheet-metal forming and panel handling without behaving like narrow packaging tape.

The removable pressure-sensitive adhesive provides temporary surface contact and is selected to limit residue on the specified finish.

Translucent blue coloration distinguishes covered areas while still allowing the underlying surface outline to remain visible.

Straight, clean roll edges support uniform machine or hand lamination across wide cleanroom components.

Moisture-resistant PE backing keeps dust, fingerprints and light abrasion away from the finished face during ordinary indoor logistics.

Kekhawatiran produk pelanggan

Finished cleanroom components can collect scratches, grinding dust, fingerprints and installation marks after their final surface treatment but before room handover.

Brushed or polished stainless steel can be marked by tools, pallets and adjacent parts during fabrication and transport.The continuous PE carrier creates a sacrificial surface that absorbs light handling abrasion before the film is removed.

An adhesive that is too weak can lift at edges, while an aggressive grade can leave residue on a finished panel.Adhesive level is matched to the substrate texture and expected dwell time rather than using one universal tack.

Clear unprinted film may be difficult for installers to see, causing protected and exposed areas to be confused.The translucent blue tint makes the coverage boundary visible without introducing product labels or decorative printing.

Narrow tape requires many overlapping strips and can leave exposed gaps on large doors or wall panels.Wide roll formats cover broad components in fewer passes and maintain one continuous protective sheet.

Aplikasi yang Tipis

Stainless steel cleanroom door and frame surfacesPowder-coated modular wall and ceiling panelsPass box, air-shower and equipment cabinet skinsAluminium trim and glazed partition componentsTemporary protection during fabrication, shipment and site installation

Parameter teknis

The values below describe the selected translucent blue low-tack PE surface-protection roll shown in the product images.

Bahan inti	Translucent blue polyethylene carrier with removable acrylic pressure-sensitive adhesive on a cardboard roll core
Ketebalan Panel (Panel Thickness)	0.055-0.080 mm total film-and-adhesive thickness
Efektif lebar	250-2600 mm roll width
Panjang maksimum	Up to 200000 mm per standard converting roll
Baja menghadap ketebalan	0 mm; the protective roll has no steel facing
Kepadatan inti (core density)	Approximately 920-930 kg/m³ for the polyethylene carrier
Konduktivitas Termal (Thermal Conductivity)	Approximately 0.33 W/(m·K) at 23°C for LDPE
Permukaan selesai	Smooth translucent blue PE outer face with a low-tack removable adhesive reverse
Jenis Bersama	Pressure-sensitive lamination with straight-cut butt or controlled overlap seams
Customization (Kustomisasi)	Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi.

Pilihan yang tersedia

Transparent, translucent blue, white or black-and-white carrier colorsLow, medium or higher temporary adhesion levels for different surface texturesFactory-slit roll widths from 250 mm to 2600 mmAlternative 25-120 micrometre process-film thicknessesEasy-peel and forming-grade constructions for fabrication lines

Planning a Cleanroom Protective Film specification?

Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.

Bicaralah dengan tim kami