English
Немецкий
Арабский язык
Французский
Индонезийский
Японский язык
Корейский
Японский
Португальский
Русский языкТекущий
Испанский язык
Тайский
Турецкий
Вьетнамский язык
УФУ и терминальное оборудование для очистки воздуха
Фильтры Blower Filter Unit (BFU)
A deeper ceiling clean-air unit using a dedicated centrifugal blower to overcome duct, damper and final-filter resistance at elevated airflow.
- High-Pressure Centrifugal Blower
- Ducted or Recirculating Inlet
- Perforated Air Diffuser
- Large Airflow Capacity
Введение продукции
The blower filter unit houses a forward- or backward-curved centrifugal blower above a full-size HEPA or ULPA filter in a deep insulated enclosure. Unlike a shallow grid FFU, the BFU is designed with enough chamber height for a larger scroll or blower wheel and can accept a round duct collar, inlet damper or recirculating top intake. An internal perforated plate distributes the higher-volume discharge over the filter surface. The format is suited to turbulent-flow rooms, high air-change zones and ceiling positions where a long duct path or loaded filter creates more resistance than a compact FFU can handle.
Основные характеристики
The large pressure chamber reduces direct fan imprint before air reaches the HEPA or ULPA surface.
A removable perforated plate smooths the discharge and protects the downstream filter face during service.
Duct-connected and self-recirculating intake arrangements use the same ceiling-mounted enclosure platform.
Обеспокоенность клиентов продуктами
Compact FFUs can lose airflow when the air path includes long ducts, dampers or a heavily loaded final filter.
Supply volume falls below target when duct and terminal pressure losses are added together.The larger centrifugal blower provides a higher available static-pressure range than a shallow axial module.
A concentrated blower outlet produces a visible high-velocity patch at the centre of the diffuser.The deep plenum and perforated equalising plate distribute pressure before final filtration.
A central air handler cannot independently trim airflow to one room or process zone.Each BFU can use its own speed setting or damper to balance the local ceiling supply.
Filter replacement requires dismantling the complete blower housing from above.A separated lower filter section permits the final filter and diffuser to be removed without lifting the blower assembly.
Типичные приложения
High air-change cleanroomsDucted pharmaceutical supply pointsElectronics packaging roomsFood processing clean zonesLarge clean booths and corridors
Технические параметры
Typical BFU enclosure and filter ranges for cleanroom ceiling service are shown below.
| Основной материал | Centrifugal blower, micro-glass HEPA or ULPA filter and optional closed-cell acoustic liner |
|---|---|
| Толщина панели | 500-750 mm overall housing depth |
| эффективная ширина | 650-1300 mm nominal ceiling module width |
| Максимальная длина | Up to 1450 mm standard housing length |
| Толщина линий стали | 1.0-1.5 mm powder-coated steel or 304 stainless-steel blower-filter casing |
| Плотность ядра | Approximately 24-48 kg/m³ density for optional closed-cell acoustic insulation |
| Теплопроводимость | Approximately 0.033-0.040 W/(m·K) for the optional closed-cell acoustic liner |
| Поверхностная отделка | Ivory-white powder coat or brushed 304 stainless steel with stainless perforated diffuser |
| Объединенный тип | Flanged duct inlet with gasketed blower access panel and compression-seal or gel-seal final filter |
| Customization | Доступно в зависимости от предполагаемого применения и операционной среды. |
Доступные варианты
Forward- or backward-curved centrifugal blowerRound duct inlet or recirculating top grilleHEPA H14 or ULPA U15 final filterStepped, inverter or EC airflow control
Planning a Blower Filter Unit (BFU) specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
