Персонал и оборудование для дезактивации материалов

Biosafety Containment Pass Box

A sealed, pressure-controlled transfer chamber with filtered exhaust and service features intended for biosafety boundaries.

Sealed Containment Chamber
Filtered Exhaust Path
Безопасно-сменный корпус фильтра
Pressure-Gated Doors

Запрос котировки Просмотреть продукты

Введение продукции

This containment pass box controls material movement between a biological work area and an adjacent support space. The welded chamber operates with a selected pressure bias, while exhaust passes through a high-efficiency final filter housed in a service enclosure. Sealed penetrations, pressure indication and one-door-at-a-time logic support a defined containment boundary.

Основные характеристики

A negative pressure bias directs small leakage towards the exhaust path.

A safe-change housing isolates the used final filter during service.

Differential-pressure indication makes chamber status visible.

Capped ports support compatible chamber treatment connections.

Coved internal welds simplify chemical wipe-down.

Обеспокоенность клиентов продуктами

Biosafety transfer must maintain leakage direction, protect maintenance personnel and preserve the barrier at every door movement.

Aged gaskets allow air to escape to the adjacent room.A controlled negative bias draws leakage inward to the filtered exhaust route.

Service staff are exposed while replacing a loaded filter.A safe-change enclosure contains the filter during removal and replacement.

Operators cannot see whether the pressure bias is established.A differential-pressure display and door permissive show the chamber state.

Cable penetrations bypass the sealed enclosure.Welded sleeves and capped pressure-tight ports retain the chamber boundary.

Типичные приложения

Biosafety laboratoriesVaccine development supportAnimal containment roomsBiological sample logistics

Технические параметры

Representative construction ranges for a biosafety containment pass box are shown below.

Основной материал	Welded SUS 316L chamber with pressure-control fan, HEPA exhaust filter and safe-change service housing
Толщина панели	100-180 mm sealed service-plenum construction
эффективная ширина	500-1100 mm clear chamber width
Максимальная длина	Up to 1500 mm chamber depth
Толщина линий стали	1,2 - 2,0 мм SUS 316L камеры облицовки
Плотность ядра	35-40 kg/m³ polyurethane insulation within external service panels
Теплопроводимость	0.022-0.028 W/(m·K) for polyurethane service-panel insulation
Поверхностная отделка	Electropolished or satin SUS 316L with coved welds and chemical-resistant door seals
Объединенный тип	Continuously welded pressure-tight chamber with compression doors and safe-change filter enclosure
Customization	Доступно в зависимости от предполагаемого применения и операционной среды.

Доступные варианты

Bag-in/bag-out filter housingPressure-decay test portsChamber-treatment connection portsBattery-backed interlock release

Planning a Biosafety Containment Pass Box specification?

Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.

Поговорите с нашей командой