Biosafety containment pass box with sealed stainless body and filter-service housing

인력 및 재료 오염 제거 장비

Biosafety Containment Pass Box (생물 안전 격리 패스 박스)

A sealed, pressure-controlled transfer chamber with filtered exhaust and service features intended for biosafety boundaries.

Sealed Containment Chamber
Filtered Exhaust Path
안전 교체 필터 하우징
Pressure-Gated Doors

견적 요청 제품 찾아보기

상품 소개

This containment pass box controls material movement between a biological work area and an adjacent support space. The welded chamber operates with a selected pressure bias, while exhaust passes through a high-efficiency final filter housed in a service enclosure. Sealed penetrations, pressure indication and one-door-at-a-time logic support a defined containment boundary.

주요 기능

A negative pressure bias directs small leakage towards the exhaust path.

A safe-change housing isolates the used final filter during service.

Differential-pressure indication makes chamber status visible.

Capped ports support compatible chamber treatment connections.

Coved internal welds simplify chemical wipe-down.

고객 제품 관심사

Biosafety transfer must maintain leakage direction, protect maintenance personnel and preserve the barrier at every door movement.

Aged gaskets allow air to escape to the adjacent room.A controlled negative bias draws leakage inward to the filtered exhaust route.

Service staff are exposed while replacing a loaded filter.A safe-change enclosure contains the filter during removal and replacement.

Operators cannot see whether the pressure bias is established.A differential-pressure display and door permissive show the chamber state.

Cable penetrations bypass the sealed enclosure.Welded sleeves and capped pressure-tight ports retain the chamber boundary.

일반적인 응용 프로그램

Biosafety laboratoriesVaccine development supportAnimal containment roomsBiological sample logistics

기술 매개변수

Representative construction ranges for a biosafety containment pass box are shown below.

핵심 재료	Welded SUS 316L chamber with pressure-control fan, HEPA exhaust filter and safe-change service housing
패널 두께	100-180 mm sealed service-plenum construction
유효 폭	500-1100 mm clear chamber width
최대 길이	Up to 1500 mm chamber depth
강철 면면 두께	1. 2 - 2. 0 mm SUS 316 L 챔버 표면
코어 밀도	35-40 kg/m³ polyurethane insulation within external service panels
열전도도 (Thermal Conductivity)	0.022-0.028 W/(m·K) for polyurethane service-panel insulation
표면 마무리	Electropolished or satin SUS 316L with coved welds and chemical-resistant door seals
접합 유형	Continuously welded pressure-tight chamber with compression doors and safe-change filter enclosure
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Bag-in/bag-out filter housingPressure-decay test portsChamber-treatment connection portsBattery-backed interlock release

Planning a Biosafety Containment Pass Box specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.