Vertical unidirectional-flow pass box with tall upper fan-filter housing

Equipamento de descontaminação de pessoal e materiais

Caixa de passagem vertical unidirecional

A pass box that delivers a broad vertical filtered airflow over the payload and returns it through low-level channels.

Full-Ceiling Filter Face
Vertical Air Sweep
Perforated Payload Support
Airflow Status Display

Introdução do produto

The vertical unidirectional-flow pass box is designed for sensitive components that benefit from a stable downward air path. Its fan pressurises a full-ceiling final filter, while a perforated work surface and lower side returns continue the flow around the load. A velocity indication and door sequence help restore the airflow field after loading.

Características-chave

A full-ceiling filter face limits dead zones above wide trays.

Lower perforated returns collect air along both payload sides.

The open support surface allows air to pass beneath containers.

An EC fan can compensate for normal filter resistance increase.

Airflow status indication supports routine operating checks.

Preocupações do produto do cliente

Critical transfers need broad coverage around the payload rather than a turbulent jet from one corner.

A small grille leaves low-velocity pockets over trays.A full-ceiling filter face distributes air across most of the chamber.

A solid floor blocks the downward airflow beneath containers.A perforated shelf and side returns maintain the path below the load.

Filter loading weakens the intended airflow.Fan adjustment and velocity display make the condition observable.

Loading-door turbulence remains when the receiving door opens.A programmed purge allows the vertical sweep to settle before release.

Aplicações típicas

Aseptic component transferSterile filling supportCell-culture suppliesOptical component movement

Parâmetros técnicos

Representative dimensions for a vertical unidirectional-flow pass box are provided below.

Material principal	SUS 304 or SUS 316L chamber with EC fan, ceiling HEPA filter and perforated low-level returns
Painel de espessura	100-180 mm airflow-plenum and double-wall construction
Largura efetiva	600-1200 mm usable chamber width
Comprimento máximo	Up to 1500 mm transfer depth
Aço enfrentando espessura	1.0-1.5 mm stainless-steel facing
Densidade Core	35-40 kg/m³ polyurethane thermal and acoustic plenum insulation
Condutividade térmica	0.022-0.028 W/(m·K) for polyurethane plenum insulation
Superfície acabado	Brushed or electropolished chamber with smooth perforated return and support panels
Tipo conjunto	Airtight welded chamber with gasketed filter frame and electronically interlocked flush doors
Customização	Disponível com base na aplicação pretendida e no ambiente operacional.

Opções disponíveis

Nominal 0.30-0.45 m/s face velocityGel-seal final filterVelocity and pressure monitoringRemovable perforated shelf

Planning a Vertical Unidirectional-Flow Pass Box specification?

Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.

Fale com a nossa equipe