Equal Double-Leave Cleanroom Swing Door (em inglês)
- Two Equal Swing Leaves
- Up to 2200 mm Clear Width
- Flush Sealed Meeting Stile
- Wide Equipment Access
Introdução do produto
The Equal Double-Leaf Cleanroom Swing Door divides a wide structural opening into two balanced leaves. A primary leaf supports the main latch and daily access, while the second leaf is retained by concealed flush bolts until the full width is needed. Dense rock wool improves panel stiffness and sound attenuation, and a gasketed meeting stile closes the central joint without an exposed floor post.
Características-chave
The inactive leaf remains secured for normal personnel passage and releases for equipment movement.
A gasketed astragal closes the central air path between the leaves.
Rock-wool infill adds density where wide leaves face repeated trolley traffic.
Concealed flush bolts avoid a permanent central mullion in the clear opening.
Preocupações do produto do cliente
Wide cleanroom openings require dependable central sealing, orderly closing and a clear threshold when both leaves are released.
Aplicações típicas
Parâmetros técnicos
Representative dimensions for an equal double-leaf cleanroom swing doorset are listed below.
| Material principal | High-density mineral wool in both leaves |
|---|---|
| Painel de espessura | 50 mm per door leaf |
| Largura efetiva | 1500-2200 mm total clear opening |
| Comprimento máximo | 2400 mm maximum leaf height |
| Aço enfrentando espessura | 0.8-1.0 mm powder-coated galvanized steel per face |
| Densidade Core | 96-120 kg/m³ mineral wool |
| Condutividade térmica | 0.035-0.045 W/(m·K) typical mineral-wool range |
| Superfície acabado | Smooth powder-coated steel with sealed meeting edges |
| Tipo conjunto | Equal paired swing leaves with gasketed overlapping astragal and concealed flush bolts |
| Customização | Disponível com base na aplicação pretendida e ambiente operacional |
Opções disponíveis
Planning a Equal Double-Leaf Cleanroom Swing Door specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.

Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã