Cleanroom LED exit sign with smooth sealed face and green legend

Iluminação de sala limpa e equipamentos elétricos

Sinal de saída da sala limpa

A sealed, low-profile exit sign that presents a bright red or green legend behind a smooth cleanable face.

Flush Sealed Face
Red or Green LED Legend
Directional Chevron Options
Backup Battery Available

Introdução do produto

The cleanroom exit sign fits into or against a wall or ceiling with a gasketed perimeter and a smooth front window. Efficient red or green LEDs illuminate the exit legend evenly, while removable chevrons or configured graphics indicate the required travel direction. Power, charger and optional battery components remain within the back box, leaving only a clear sealed face visible to the controlled room.

Características-chave

A flush front window allows direct wiping without raised letter edges.

Uniform LEDs keep the legend readable without hot spots.

Configured directional arrows avoid field-cut openings in the sealed face.

The rear enclosure separates wiring and battery components from the cleanroom.

A narrow white or stainless trim blends with modular wall and ceiling panels.

Preocupações do produto do cliente

An exit sign must remain unmistakable during normal and backup operation without adding open seams, detachable letters or projecting housings.

Applied letters and arrows create edges that collect dust.The complete legend is protected behind one smooth transparent face.

Field-punched chevrons can leave unsealed openings.Directional graphics are configured before assembly inside the sealed window.

A bulky battery compartment projects into narrow airlocks.The power pack sits inside the recessed rear enclosure or a remote service space.

Uneven illumination makes parts of the word difficult to read.A distributed LED light guide illuminates the full legend consistently.

Aplicações típicas

Cleanroom emergency exitsGowning and airlock routesLaboratory egress corridorsControlled production doorways

Parâmetros técnicos

Typical configurable construction ranges for a cleanroom LED exit sign are listed below.

Material principal	Powder-coated steel or stainless back box with LED light guide, printed legend and clear polycarbonate window
Painel de espessura	45-100 mm recessed or surface enclosure depth
Largura efetiva	300-420 mm visible sign width
Comprimento máximo	Up to 500 mm overall sign dimension including trim
Aço enfrentando espessura	0.8-1.2 mm formed steel or stainless trim and back box
Densidade Core	Approximately 1200 kg/m³ for the clear polycarbonate face
Condutividade térmica	0.20-0.22 W/(m·K) for the polycarbonate window
Superfície acabado	White powder-coated or fine-brushed stainless trim with smooth clear legend face
Tipo conjunto	Gasketed flush perimeter with sealed transparent face and concealed rear wiring compartment
Customização	Disponível com base na aplicação pretendida e no ambiente operacional.

Opções disponíveis

Red or green legendSingle- or double-face configurationLeft, right or dual directional chevronsIntegral emergency battery

Planning a Cleanroom Exit Sign specification?

Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.

Fale com a nossa equipe