Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Acessórios de instalação de sala limpa
Cleanroom Door Gaskets (em inglês)
A black hollow-bulb gasket retained in a cleanroom door-frame channel to create continuous compression around the opening.
- Retained Bulb Profile
- Controlled Closing Force
- Continuous Frame Compression
- Replaceable Kerf Mount
Introdução do produto
The cleanroom door gasket combines a hollow EPDM compression bulb with a flexible neck and arrowhead-style retaining foot. The retainer locks into a matching kerf or aluminum channel around the cleanroom door frame, keeping the seal aligned during repeated opening and closing. When the leaf engages the bulb, the hollow chamber deforms progressively to close perimeter tolerances while limiting load on hinges, latches and automatic operators.
Características-chave
The arrowhead foot locks mechanically into a continuous frame channel without exposed fasteners.
Defined corner joints preserve the seal path around mitred stainless or aluminum frames.
The removable profile can be replaced independently when wear or permanent compression develops.
Preocupações do produto do cliente
A cleanroom door perimeter must close reliably without creating excessive latch force or allowing the gasket to pull out of its frame channel.
An overly stiff seal prevents consistent latching and accelerates hardware wear.The hollow bulb compresses gradually and is sized for the actual door-frame gap.
Adhesive-backed strips creep or detach during repeated cleaning and door cycles.A shaped retaining foot locks into the frame kerf for positive mechanical location.
Open corner cuts create air-leak paths at the most difficult frame transitions.Joined or molded corner sections maintain continuous compression around the complete perimeter.
A damaged seal can require disruptive frame disassembly.The replaceable insert pulls from the channel and a matching new profile presses into the existing retainer.
Aplicações típicas
Hinged cleanroom personnel doorsPass-through chamber doorsStainless equipment access doorsPharmaceutical corridor doorsControlled-environment service hatches
Parâmetros técnicos
Typical construction ranges for a retained cleanroom door bulb gasket and matching frame channel are shown below.
| Material principal | Black EPDM hollow bulb with flexible neck and arrowhead retaining foot |
|---|---|
| Painel de espessura | 8-25 mm uncompressed gasket projection from the frame channel |
| Largura efetiva | 10-35 mm bulb contact width |
| Comprimento máximo | Up to 12000 mm continuous perimeter extrusion or custom joined door-frame set |
| Aço enfrentando espessura | 1.00-2.00 mm stainless or coated-steel frame skin |
| Densidade Core | Approximately 1050-1250 kg/m³ compact EPDM profile density |
| Condutividade térmica | Approximately 0.20-0.30 W/(m·K) for compact EPDM |
| Superfície acabado | Smooth matte black compression bulb in brushed stainless or anodized aluminum channel |
| Tipo conjunto | Kerf-retained continuous extrusion with bonded, mitred or molded frame corners |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Opções disponíveis
EPDM or silicone bulbArrowhead or barbed retaining footJoined rectangular frame setCustom compression height and hardness
Planning a Cleanroom Door Gasket specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
