Three-quarter view of integrated HEPA clean air supply module with blue top duct collar

FFU dan Peralatan Penulenan Udara Terminal

Modul Bekalan Udara Bersih HEPA Bersepadu

A complete ducted ceiling terminal combining an inlet damper, pressure-equalizing plenum, sealed HEPA or ULPA filter and room-side diffuser in one cleanable module.

Balanced Ducted Supply
HEPA or ULPA Final Stage
Room-Side Test Access
Interchangeable Diffuser

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

The integrated HEPA clean air supply module receives conditioned air through a top or side duct collar and distributes it across a sealed final filter through an internal equalization plenum. A balancing damper can be adjusted from the cleanroom side, while separate upstream pressure and aerosol ports support routine checks without opening the ceiling void. The module includes the filter seat, retaining hardware and removable perforated or radial diffuser, so the complete air terminal can be installed as one coordinated ceiling component rather than assembled from unrelated parts on site.

Ciri-ciri Utama

An internal equalization chamber spreads duct velocity before air reaches the full filter face.

Room-side damper access allows supply volume to be balanced after ceiling installation.

Separate upstream pressure and challenge ports keep routine test connections accessible below the ceiling.

A quick-release face accepts different diffuser patterns without replacing the sealed plenum.

Kebimbangan Produk Pelanggan

A cleanroom supply point must convert uneven duct air into a sealed, testable and draught-controlled final discharge without consuming unnecessary ceiling space.

High inlet velocity loads one part of the HEPA face and leaves another area underused.The pressure-equalizing plenum diffuses the incoming jet before it enters the final filter.

Ceiling access is obstructed by services when the airflow damper needs adjustment.A room-side adjustment mechanism reaches the inlet damper through the removable diffuser.

Temporary hoses for filter testing are routed through the occupied ceiling void.Dedicated room-side pressure and aerosol ports connect directly to the upstream plenum.

One discharge pattern creates local draughts after the room layout changes.Perforated, swirl or radial front plates can be exchanged while the terminal body remains installed.

Permohonan yang biasa

Pharmaceutical production suitesHospital clean treatment roomsBiotechnology laboratoriesMedical-device assembly areasDucted microelectronics cleanrooms

Parameter teknikal

Representative construction ranges for an integrated ducted HEPA clean-air supply module are listed below.

Bahan Teras	Welded pressure plenum with micro-glass H13-H14 HEPA or optional ULPA mini-pleat filter
Ketebalan Panel	250-450 mm overall module depth excluding the duct collar
Lebar berkesan	575-1175 mm nominal ceiling-module width
Panjang maksimum	Up to 1175 mm standard module length
Keluli Menghadapi Ketebalan	0.8-1.2 mm welded powder-coated steel or 304 stainless-steel plenum
Ketumpatan teras	Approximately 90-120 kg/m³ compacted density of the mini-pleat pack integrated into the clean-air supply module
Kekonduksian Terma	Approximately 0.035-0.043 W/(m·K) for the mini-pleat pack installed in the integrated clean-air supply module
Kemasan permukaan	Cleanroom-white epoxy-polyester powder coat or brushed 304 stainless steel
Jenis Bersatu	Welded plenum with gasketed duct collar, compression or gel filter seat and sealed T-grid perimeter
Penyesuaian	Boleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi.

Pilihan yang boleh didapati

Top or side duct collarManual or room-side adjustable inlet damperH13, H14 or ULPA final filterPerforated, radial or swirl diffuser

Planning a Integrated HEPA Clean Air Supply Module specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami