Cleanroom air circulation disinfector main view

Pembersihan bilik bersih, pembasmian kuman dan pensterilan

Disinfector Peredaran Udara Bilik Bersih

A local cleanroom recirculation unit integrating sealed airflow paths, staged filtration, optional treatment modules, and controlled supply-air delivery.

Airtight recirculation path limits bypass around filter stages
HEPA-filtered supply supports local particle-load reduction
Plug-and-play controls simplify supplemental cleanroom airflow

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

This cleanroom air circulation disinfector is configured as a floor-standing or ceiling-mounted local recirculation module. Its sealed plenum, smooth enclosure, high-efficiency filtration, and variable fan enable targeted air turnover in pharmaceutical and other demanding controlled spaces. Final performance depends on room airflow mapping, filter selection, placement, and the facility contamination-control plan.

Ciri-ciri Utama

Airtight integrated recirculation plenum

Prefilter and final HEPA filter stages

Energy-efficient variable-speed EC fan

Differential-pressure filter monitoring

Low-noise lined enclosure

Directional supply and return grilles

Optional cooling coil or compatible treatment module

Local touchscreen and remote control interface

Kebimbangan Produk Pelanggan

Cleanrooms may develop local particle or heat loads that a centralized system cannot address efficiently. Supplemental equipment must avoid leakage, uncontrolled drafts, excessive noise, and maintenance practices that release captured contamination.

How is filter bypass controlled?Gasketed filter tracks, clamping hardware, and sealed casing joints maintain the intended airflow path.

Can airflow be balanced on site?The EC fan offers adjustable output, and optional airflow sensing supports commissioning at the selected operating point.

How is maintenance handled cleanly?Dedicated access panels permit staged filter removal and internal wipe-down without dismantling the main casing.

Can the unit communicate with facility controls?Optional Modbus or dry-contact interfaces provide run status, alarms, and speed commands.

Permohonan yang biasa

Pharmaceutical cleanroomsBiotechnology production spacesMedical-device controlled assemblyBilik sokongan makmalFood and beverage clean zonesElectronics and precision manufacturing

Parameter teknikal

Return air enters through a cleanable grille and passes a prefilter, fan, treatment section, and final high-efficiency filter before discharge through a directional supply grille. An EC fan provides adjustable airflow, while pressure sensors monitor filter loading. Optional cooling or compatible disinfection modules can be integrated.

Bahan Teras	Aluminum or stainless-steel sealed plenum with gasketed filter tracks
Ketebalan Panel	25–50 mm double-skin casing panels
Lebar berkesan	700–1200 mm unit width
Panjang maksimum	900–1600 mm maximum casing dimension
Keluli Menghadapi Ketebalan	0.8–1.2 mm metal facing
Ketumpatan teras	40–60 kg/m³ acoustic and thermal insulation
Kekonduksian Terma	0.030–0.040 W/(m·K)
Kemasan permukaan	White powder coating or brushed stainless steel with cleanable grilles
Jenis Bersatu	Gasketed double-skin casing joints with sealed filter clamps and flanged air connections
Penyesuaian	Boleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi.

Pilihan yang boleh didapati

Floor-standing or ceiling-mounted configurationHEPA filter grades and prefilter formatsIntegrated cooling coilUV-C or other compatible air-treatment sectionLocal touchscreen and BMS connectionStainless-steel internal surfacesSupply and return duct adapters

Planning a Cleanroom Air Circulation Disinfector specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami