Anglais
Allemand
Arabe
FrançaisCurrent
Indonésien
Japonais
Coréen
Le malais
Le portugais
russe
espagnol
Thaïlandais
Le turc
Le vietnamien
Nettoyage, désinfection et stérilisation de la salle blanche
Disinfecteur de circulation d'air Cleanroom
A local cleanroom recirculation unit integrating sealed airflow paths, staged filtration, optional treatment modules, and controlled supply-air delivery.
- Airtight recirculation path limits bypass around filter stages
- HEPA-filtered supply supports local particle-load reduction
- Plug-and-play controls simplify supplemental cleanroom airflow
Introduction de produit
This cleanroom air circulation disinfector is configured as a floor-standing or ceiling-mounted local recirculation module. Its sealed plenum, smooth enclosure, high-efficiency filtration, and variable fan enable targeted air turnover in pharmaceutical and other demanding controlled spaces. Final performance depends on room airflow mapping, filter selection, placement, and the facility contamination-control plan.
Key Features
Prefilter and final HEPA filter stages
Energy-efficient variable-speed EC fan
Differential-pressure filter monitoring
Low-noise lined enclosure
Directional supply and return grilles
Optional cooling coil or compatible treatment module
Local touchscreen and remote control interface
Préoccupations du client produit
Cleanrooms may develop local particle or heat loads that a centralized system cannot address efficiently. Supplemental equipment must avoid leakage, uncontrolled drafts, excessive noise, and maintenance practices that release captured contamination.
How is filter bypass controlled?Gasketed filter tracks, clamping hardware, and sealed casing joints maintain the intended airflow path.
Can airflow be balanced on site?The EC fan offers adjustable output, and optional airflow sensing supports commissioning at the selected operating point.
How is maintenance handled cleanly?Dedicated access panels permit staged filter removal and internal wipe-down without dismantling the main casing.
Can the unit communicate with facility controls?Optional Modbus or dry-contact interfaces provide run status, alarms, and speed commands.
Les applications typiques
Pharmaceutical cleanroomsBiotechnology production spacesMedical-device controlled assemblySalles de soutien de laboratoireFood and beverage clean zonesElectronics and precision manufacturing
Paramètres techniques
Return air enters through a cleanable grille and passes a prefilter, fan, treatment section, and final high-efficiency filter before discharge through a directional supply grille. An EC fan provides adjustable airflow, while pressure sensors monitor filter loading. Optional cooling or compatible disinfection modules can be integrated.
| Matériaux de base | Aluminum or stainless-steel sealed plenum with gasketed filter tracks |
|---|---|
| Panneau épaisseur | 25–50 mm double-skin casing panels |
| Largeur effective | 700–1200 mm unit width |
| Longueur maximale | 900–1600 mm maximum casing dimension |
| Acier face épaisseur | 0.8–1.2 mm metal facing |
| Densité Core | 40–60 kg/m³ acoustic and thermal insulation |
| Conductivité thermique | 0.030–0.040 W/(m·K) |
| surface finie | White powder coating or brushed stainless steel with cleanable grilles |
| Type joint | Gasketed double-skin casing joints with sealed filter clamps and flanged air connections |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation. |
Options disponibles
Floor-standing or ceiling-mounted configurationHEPA filter grades and prefilter formatsIntegrated cooling coilUV-C or other compatible air-treatment sectionLocal touchscreen and BMS connectionStainless-steel internal surfacesSupply and return duct adapters
Planning a Cleanroom Air Circulation Disinfector specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
