Cleanroom air circulation disinfector main view

클린룸 청소, 소독 및 소독

청정실 공기 순환 소독기

A local cleanroom recirculation unit integrating sealed airflow paths, staged filtration, optional treatment modules, and controlled supply-air delivery.

Airtight recirculation path limits bypass around filter stages
HEPA-filtered supply supports local particle-load reduction
Plug-and-play controls simplify supplemental cleanroom airflow

견적 요청 제품 찾아보기

상품 소개

This cleanroom air circulation disinfector is configured as a floor-standing or ceiling-mounted local recirculation module. Its sealed plenum, smooth enclosure, high-efficiency filtration, and variable fan enable targeted air turnover in pharmaceutical and other demanding controlled spaces. Final performance depends on room airflow mapping, filter selection, placement, and the facility contamination-control plan.

주요 기능

Airtight integrated recirculation plenum

Prefilter and final HEPA filter stages

Energy-efficient variable-speed EC fan

차압 필터 모니터링

Low-noise lined enclosure

Directional supply and return grilles

Optional cooling coil or compatible treatment module

Local touchscreen and remote control interface

고객 제품 관심사

Cleanrooms may develop local particle or heat loads that a centralized system cannot address efficiently. Supplemental equipment must avoid leakage, uncontrolled drafts, excessive noise, and maintenance practices that release captured contamination.

How is filter bypass controlled?Gasketed filter tracks, clamping hardware, and sealed casing joints maintain the intended airflow path.

Can airflow be balanced on site?The EC fan offers adjustable output, and optional airflow sensing supports commissioning at the selected operating point.

How is maintenance handled cleanly?Dedicated access panels permit staged filter removal and internal wipe-down without dismantling the main casing.

Can the unit communicate with facility controls?Optional Modbus or dry-contact interfaces provide run status, alarms, and speed commands.

일반적인 응용 프로그램

Pharmaceutical cleanroomsBiotechnology production spacesMedical-device controlled assembly실험실 지원실Food and beverage clean zonesElectronics and precision manufacturing

기술 매개변수

Return air enters through a cleanable grille and passes a prefilter, fan, treatment section, and final high-efficiency filter before discharge through a directional supply grille. An EC fan provides adjustable airflow, while pressure sensors monitor filter loading. Optional cooling or compatible disinfection modules can be integrated.

핵심 재료	Aluminum or stainless-steel sealed plenum with gasketed filter tracks
패널 두께	25–50 mm double-skin casing panels
유효 폭	700–1200 mm unit width
최대 길이	900–1600 mm maximum casing dimension
강철 면면 두께	0.8–1.2 mm metal facing
코어 밀도	40–60 kg/m³ acoustic and thermal insulation
열전도도 (Thermal Conductivity)	0.030–0.040 W/(m·K)
표면 마무리	White powder coating or brushed stainless steel with cleanable grilles
접합 유형	Gasketed double-skin casing joints with sealed filter clamps and flanged air connections
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Floor-standing or ceiling-mounted configurationHEPA filter grades and prefilter formatsIntegrated cooling coilUV-C or other compatible air-treatment sectionLocal touchscreen and BMS connectionStainless-steel internal surfacesSupply and return duct adapters

Planning a Cleanroom Air Circulation Disinfector specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.