Nhà cung cấp một cửa của bạn cho thiết bị phòng sạch và thiết bị vô trùng cơ sở thiết yếuHỗ trợ dự án quốc tế
Open mobile navigationClose mobile navigation
Làm sạch phòng sạch, khử trùng và tiệt trùng

Máy khử trùng không khí lưu thông phòng sạch

A local cleanroom recirculation unit integrating sealed airflow paths, staged filtration, optional treatment modules, and controlled supply-air delivery.
  • Airtight recirculation path limits bypass around filter stages
  • HEPA-filtered supply supports local particle-load reduction
  • Plug-and-play controls simplify supplemental cleanroom airflow
Yêu cầu báo giá Duyệt các sản phẩm

Giới thiệu Sản phẩm

This cleanroom air circulation disinfector is configured as a floor-standing or ceiling-mounted local recirculation module. Its sealed plenum, smooth enclosure, high-efficiency filtration, and variable fan enable targeted air turnover in pharmaceutical and other demanding controlled spaces. Final performance depends on room airflow mapping, filter selection, placement, and the facility contamination-control plan.

Các tính năng chính

Airtight integrated recirculation plenum

Prefilter and final HEPA filter stages

Energy-efficient variable-speed EC fan

Differential-pressure filter monitoring

Low-noise lined enclosure

Directional supply and return grilles

Optional cooling coil or compatible treatment module

Local touchscreen and remote control interface

Các mối quan tâm về sản phẩm của khách hàng

Cleanrooms may develop local particle or heat loads that a centralized system cannot address efficiently. Supplemental equipment must avoid leakage, uncontrolled drafts, excessive noise, and maintenance practices that release captured contamination.

How is filter bypass controlled?Gasketed filter tracks, clamping hardware, and sealed casing joints maintain the intended airflow path.
Can airflow be balanced on site?The EC fan offers adjustable output, and optional airflow sensing supports commissioning at the selected operating point.
How is maintenance handled cleanly?Dedicated access panels permit staged filter removal and internal wipe-down without dismantling the main casing.
Can the unit communicate with facility controls?Optional Modbus or dry-contact interfaces provide run status, alarms, and speed commands.

Các ứng dụng điển hình

Pharmaceutical cleanroomsBiotechnology production spacesMedical-device controlled assemblyPhòng hỗ trợ phòng thí nghiệmFood and beverage clean zonesElectronics and precision manufacturing

Thông số kỹ thuật

Return air enters through a cleanable grille and passes a prefilter, fan, treatment section, and final high-efficiency filter before discharge through a directional supply grille. An EC fan provides adjustable airflow, while pressure sensors monitor filter loading. Optional cooling or compatible disinfection modules can be integrated.

Vật liệu lõiAluminum or stainless-steel sealed plenum with gasketed filter tracks
Độ dày bảng điều khiển25–50 mm double-skin casing panels
Chiều rộng hiệu quả700–1200 mm unit width
Chiều dài tối đa900–1600 mm maximum casing dimension
Thép đối mặt với độ dày0.8–1.2 mm metal facing
Mật độ lõi40–60 kg/m³ acoustic and thermal insulation
Độ dẫn nhiệt0.030–0.040 W/(m·K)
Kết thúc bề mặtWhite powder coating or brushed stainless steel with cleanable grilles
Loại khớp nốiGasketed double-skin casing joints with sealed filter clamps and flanged air connections
Tùy chỉnhCó sẵn dựa trên ứng dụng dự định và môi trường hoạt động.

Các tùy chọn có sẵn

Floor-standing or ceiling-mounted configurationHEPA filter grades and prefilter formatsIntegrated cooling coilUV-C or other compatible air-treatment sectionLocal touchscreen and BMS connectionStainless-steel internal surfacesSupply and return duct adapters

Planning a Cleanroom Air Circulation Disinfector specification?

Gửi cho chúng tôi kích thước của bạn, điều kiện lắp đặt, mục tiêu hiệu suất và bề mặt yêu cầu hoàn thiện.

Nói chuyện với đội ngũ của chúng tôi
Email cho chúng tôi WhatsApp WeChat

Trang chủ

Sản phẩm

Tin tức

Về chúng tôi

Liên hệ