Cleanroom air circulation disinfector main view

クリーンルームの清掃 · 消毒 · 滅菌

クリーンルームの空気循環の消毒剤

A local cleanroom recirculation unit integrating sealed airflow paths, staged filtration, optional treatment modules, and controlled supply-air delivery.

Airtight recirculation path limits bypass around filter stages
HEPA-filtered supply supports local particle-load reduction
Plug-and-play controls simplify supplemental cleanroom airflow

見積もりリクエスト製品案内

商品紹介

This cleanroom air circulation disinfector is configured as a floor-standing or ceiling-mounted local recirculation module. Its sealed plenum, smooth enclosure, high-efficiency filtration, and variable fan enable targeted air turnover in pharmaceutical and other demanding controlled spaces. Final performance depends on room airflow mapping, filter selection, placement, and the facility contamination-control plan.

主要な特徴

Airtight integrated recirculation plenum

Prefilter and final HEPA filter stages

Energy-efficient variable-speed EC fan

Differential-pressure filter monitoring

Low-noise lined enclosure

Directional supply and return grilles

Optional cooling coil or compatible treatment module

Local touchscreen and remote control interface

お客様の製品に関する懸念事項

Cleanrooms may develop local particle or heat loads that a centralized system cannot address efficiently. Supplemental equipment must avoid leakage, uncontrolled drafts, excessive noise, and maintenance practices that release captured contamination.

How is filter bypass controlled?Gasketed filter tracks, clamping hardware, and sealed casing joints maintain the intended airflow path.

Can airflow be balanced on site?The EC fan offers adjustable output, and optional airflow sensing supports commissioning at the selected operating point.

How is maintenance handled cleanly?Dedicated access panels permit staged filter removal and internal wipe-down without dismantling the main casing.

Can the unit communicate with facility controls?Optional Modbus or dry-contact interfaces provide run status, alarms, and speed commands.

典型的な用途

Pharmaceutical cleanroomsBiotechnology production spacesMedical-device controlled assembly研究室サポートルームFood and beverage clean zonesElectronics and precision manufacturing

技術的なパラメータ

Return air enters through a cleanable grille and passes a prefilter, fan, treatment section, and final high-efficiency filter before discharge through a directional supply grille. An EC fan provides adjustable airflow, while pressure sensors monitor filter loading. Optional cooling or compatible disinfection modules can be integrated.

コア材料	Aluminum or stainless-steel sealed plenum with gasketed filter tracks
パネルの厚さ	25–50 mm double-skin casing panels
有効幅	700–1200 mm unit width
最大長さ	900–1600 mm maximum casing dimension
鋼鉄の厚さを直面する	0.8–1.2 mm metal facing
コア密度	40–60 kg/m³ acoustic and thermal insulation
熱伝導率	0.030–0.040 W/(m·K)
表面仕上げ	White powder coating or brushed stainless steel with cleanable grilles
ジョイントタイプ	Gasketed double-skin casing joints with sealed filter clamps and flanged air connections
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Floor-standing or ceiling-mounted configurationHEPA filter grades and prefilter formatsIntegrated cooling coilUV-C or other compatible air-treatment sectionLocal touchscreen and BMS connectionStainless-steel internal surfacesSupply and return duct adapters

Planning a Cleanroom Air Circulation Disinfector specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する