Complete HPL cleanroom wall liner panel with concealed support profiles

クリーンルームの壁と天井システム

HPL クリーンルームの壁ライナーパネル

A compact high-pressure laminate lining system fixed over an existing wall, creating a hard, moisture-tolerant and easy-to-wipe cleanroom surface without building a second insulated partition.

12 mm Compact HPL Face
Concealed Mechanical Supports
Impact-Resistant Wall Upgrade
Sealed Vertical Connections

見積もりリクエスト製品案内

商品紹介

HPL Cleanroom Wall Liner Panels use a homogeneous compact laminate sheet carried on concealed aluminum support profiles. The liner sits in front of masonry, concrete or framed construction and converts the substrate into a smooth controlled-environment finish. Interlocking vertical profiles hold each sheet without exposed front fasteners, while the recessed base detail can meet a sheet-vinyl or resin floor with minimal ledges. Because the sheet itself is dense and self-supporting, the system does not depend on a foam or mineral insulation core.

主要な特徴

Dense thermoset laminate resists everyday impact and abrasion in busy internal areas.

Mechanical attachment avoids wet bonding over the entire existing wall surface.

Concealed vertical profiles keep screws and clips away from the cleanable face.

Compact HPL can be machined for sockets, controls and service penetrations before fitting.

Individual sheets remain accessible for localized replacement after surface damage.

お客様の製品に関する懸念事項

Wall-lining buyers focus on substrate irregularity, edge moisture, visible fasteners and repair access in occupied facilities.

Uneven masonry produces visible waves when thin decorative sheets are bonded directly to it.Adjustable vertical supports establish a straight plane before the compact laminate is attached.

Open HPL edges can absorb moisture or collect residue near floors and service holes.Recessed base profiles, closed cut-out trims and continuous joint sealant protect exposed edges.

Surface screws create cleaning obstructions across a newly lined wall.Interlocking rear profiles retain the sheets while leaving the room face free of visible mechanical fixings.

A damaged section of permanently bonded cladding is difficult to remove neatly.Modular support profiles allow one liner sheet to be released without stripping the complete elevation.

典型的な用途

HPL laboratory lining upgradesPharmaceutical support roomsHospital clean corridorsMedical-device assembly areasGowning and personnel-change rooms

技術的なパラメータ

Common production dimensions for compact HPL cleanroom liner systems are listed below.

コア材料	N/A — homogeneous compact high-pressure laminate has no separate core
パネルの厚さ	12 mm
有効幅	1286 mm
最大長さ	3000 mm
鋼鉄の厚さを直面する	N/A — compact HPL liner has no steel facing
コア密度	N/A — the liner is a solid laminate sheet rather than a low-density core panel
熱伝導率	N/A — wall liner is not used as a thermal-insulation component
表面仕上げ	Smooth low-texture compact HPL in cleanroom white or selected solid colour
ジョイントタイプ	Concealed interlocking vertical supports with 20 × 30 mm joint tube and sealed face joint
カスタマイズ	目的のアプリケーションおよび動作環境に基づいて利用可能

利用可能なオプション

Recessed or floor-reaching base detailAlternative solid HPL coloursPre-machined utility openingsInternal corner and end-closure profiles

Planning a HPL Cleanroom Wall Liner Panel specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する