日本語
ドイツ人。
アラビア語：アラビア語
フランス語で
インドネシア語
日本語で。流れ
韓国語
マレー語
ポルトガル語
ロシア語
スペイン語
タイ語
トルコ語
ベトナム語
クリーンルーム HVAC および空気処理装置
クリーン蒸気交換加湿器
A steam-to-steam humidification package that uses plant steam as the heat source while generating separate atmospheric steam from treated water for cleanroom air systems.
- Separated Plant-Steam Circuit
- 316 Stainless Heat Exchanger
- Modulating Clean-Steam Output
- Sanitary Drainable Construction
商品紹介
The clean steam exchange humidifier transfers heat from pressurized facility steam through a stainless heat exchanger into potable, reverse-osmosis or deionized make-up water. Boiler additives remain isolated from the atmospheric steam delivered to the air-handling system. A drainable vessel, modulating steam valve, level control and stainless dispersion assembly create a serviceable package for processes that require controlled humidity without introducing boiler-treatment carryover.
主要な特徴
The 316 stainless heat exchanger provides a durable corrosion-resistant heat-transfer surface, while the vessel and remaining packaged components use stainless-steel construction suited to their service.
Modulating steam admission follows the humidity signal without cycling electric heating elements.
Accessible vessel connections, removable separator components and automatic drain functions simplify scale removal and sanitation routines.
お客様の製品に関する懸念事項
Critical facilities often have abundant plant steam but cannot permit boiler-treatment chemicals or entrained condensate to enter the cleanroom supply air.
Facility steam contains treatment chemicals that are unsuitable for direct dispersion into occupied clean areas.The steam-to-steam heat exchanger boils a separate treated-water circuit, so plant steam and generated humidification steam never mix.
Mineral deposits can accumulate on heat-transfer surfaces and reduce output over time.RO or DI make-up water, automatic drain cycles and an accessible stainless vessel reduce deposit loading and support routine cleaning.
A wide humidity load range can cause wet duct surfaces when steam output changes too abruptly.A modulating control valve meters heat input while a correctly sized dispersion manifold promotes rapid absorption across the duct.
Maintenance access is difficult when the humidifier is buried inside an air-handling section.The freestanding skid locates the vessel, valve train, strainer and drains at floor level while only the dispersion assembly occupies the duct.
典型的な用途
Sterile pharmaceutical manufacturing suitesBiotechnology cleanroom air-handling systemsMedical-device assembly environmentsHospital sterile processing ventilationElectronics facilities requiring low-particulate humidification
技術的なパラメータ
Typical construction ranges for a packaged steam-exchange humidifier serving cleanroom air systems are shown below.
| コア材料 | 316 stainless steel heat exchanger with a stainless-steel vessel, separator and packaged piping |
|---|---|
| パネルの厚さ | 1.5-3.0 mm stainless vessel shell and fabricated support thickness |
| 有効幅 | 700-1600 mm typical skid width according to steam capacity |
| 最大長さ | Up to 1500 mm overall cabinet/skid length for the largest listed packaged capacity |
| 鋼鉄の厚さを直面する | 1.2-2.0 mm stainless guard, drip tray or optional enclosure sheet |
| コア密度 | Approximately 7900-8000 kg/m³ for austenitic stainless wetted components |
| 熱伝導率 | Approximately 14-16 W/(m·K) for the 316 stainless heat exchanger at room temperature |
| 表面仕上げ | Pickled and passivated stainless steel with smooth drainable wetted surfaces |
| ジョイントタイプ | Sanitary clamp or flanged steam connections with welded stainless piping and gasketed vessel closures |
| カスタマイズ | 意図したアプリケーションと動作環境に基づいて利用できます。 |
利用可能なオプション
Potable-water, RO-water or DI-water configurationSingle-tube or multi-tube steam dispersion lance, available up to 3000 mm to suit duct widthStainless weather enclosure for protected outdoor installationModbus or BACnet interface with remote output and alarm signals
Planning a Clean Steam Exchange Humidifier specification?
寸法、設置条件、性能目標、必要な表面仕上げをお送りください。
