Clean steam exchange humidifier skid with stainless vessel and dispersion tube

클린룸 HVAC 및 공기 처리 장비

증기 교환 가습기

A steam-to-steam humidification package that uses plant steam as the heat source while generating separate atmospheric steam from treated water for cleanroom air systems.

Separated Plant-Steam Circuit
316 Stainless Heat Exchanger
Modulating Clean-Steam Output
Sanitary Drainable Construction

견적 요청 제품 찾아보기

상품 소개

The clean steam exchange humidifier transfers heat from pressurized facility steam through a stainless heat exchanger into potable, reverse-osmosis or deionized make-up water. Boiler additives remain isolated from the atmospheric steam delivered to the air-handling system. A drainable vessel, modulating steam valve, level control and stainless dispersion assembly create a serviceable package for processes that require controlled humidity without introducing boiler-treatment carryover.

주요 기능

A double-circuit heat exchanger keeps treated humidifier water physically separate from facility boiler condensate.

The 316 stainless heat exchanger provides a durable corrosion-resistant heat-transfer surface, while the vessel and remaining packaged components use stainless-steel construction suited to their service.

Modulating steam admission follows the humidity signal without cycling electric heating elements.

Accessible vessel connections, removable separator components and automatic drain functions simplify scale removal and sanitation routines.

고객 제품 관심사

Critical facilities often have abundant plant steam but cannot permit boiler-treatment chemicals or entrained condensate to enter the cleanroom supply air.

Facility steam contains treatment chemicals that are unsuitable for direct dispersion into occupied clean areas.The steam-to-steam heat exchanger boils a separate treated-water circuit, so plant steam and generated humidification steam never mix.

Mineral deposits can accumulate on heat-transfer surfaces and reduce output over time.RO or DI make-up water, automatic drain cycles and an accessible stainless vessel reduce deposit loading and support routine cleaning.

A wide humidity load range can cause wet duct surfaces when steam output changes too abruptly.A modulating control valve meters heat input while a correctly sized dispersion manifold promotes rapid absorption across the duct.

Maintenance access is difficult when the humidifier is buried inside an air-handling section.The freestanding skid locates the vessel, valve train, strainer and drains at floor level while only the dispersion assembly occupies the duct.

일반적인 응용 프로그램

Sterile pharmaceutical manufacturing suitesBiotechnology cleanroom air-handling systemsMedical-device assembly environmentsHospital sterile processing ventilationElectronics facilities requiring low-particulate humidification

기술 매개변수

Typical construction ranges for a packaged steam-exchange humidifier serving cleanroom air systems are shown below.

핵심 재료	316 stainless steel heat exchanger with a stainless-steel vessel, separator and packaged piping
패널 두께	1.5-3.0 mm stainless vessel shell and fabricated support thickness
유효 폭	700-1600 mm typical skid width according to steam capacity
최대 길이	Up to 1500 mm overall cabinet/skid length for the largest listed packaged capacity
강철 면면 두께	1.2-2.0 mm stainless guard, drip tray or optional enclosure sheet
코어 밀도	Approximately 7900-8000 kg/m³ for austenitic stainless wetted components
열전도도 (Thermal Conductivity)	Approximately 14-16 W/(m·K) for the 316 stainless heat exchanger at room temperature
표면 마무리	Pickled and passivated stainless steel with smooth drainable wetted surfaces
접합 유형	Sanitary clamp or flanged steam connections with welded stainless piping and gasketed vessel closures
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Potable-water, RO-water or DI-water configurationSingle-tube or multi-tube steam dispersion lance, available up to 3000 mm to suit duct widthStainless weather enclosure for protected outdoor installationModbus or BACnet interface with remote output and alarm signals

Planning a Clean Steam Exchange Humidifier specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.