日本語
ドイツ人。
アラビア語：アラビア語
フランス語で
インドネシア語
日本語で。流れ
韓国語
マレー語
ポルトガル語
ロシア語
スペイン語
タイ語
トルコ語
ベトナム語
Mobile 電離化人事ブローオフポータル
A compact self-contained air shower mounted on a relocatable base for temporary clean zones, phased production areas and entrance trials.
Controlled Personnel Cleaning
Blow-Off & Decontamination Systems
Address contamination on workwear with a cleaning system suited to your operation. Explore blow-off portals, extraction cabinets, misting and wet-treatment systems designed for different garment types, residues and entry arrangements.
8systems for personnel blow-off and decontamination
8 System Configurations
01Identify whether the unit serves entry cleaning, exit de-dusting or wet decontamination.
02Confirm normal workwear, reusable protective suits or chemical protective garments.
03Define available floor space, drainage, water, extraction and electrical services.
04State expected users per shift and the required doorway or enclosed-chamber workflow.
How to Select Blow-Off & Decontamination Systems
Start with the operating task and site constraints, then compare the product direction that best matches the intended use.
| Buyer requirement | Product direction | Why it helps |
|---|---|---|
| Temporary or relocatable dry cleaning | Mobile ionizing blow-off portal | Position, power supply and static-control need |
| Dry cleaning at an existing doorway | Fixed doorway blow-off portal | Opening width and surrounding airflow |
| Captured removal of industrial garment dust | Dust-removal cabinet or de-dusting booth | Extraction route and filter servicing |
| Bind loose powder before de-gowning | Misting decontamination shower | Water quality, drainage and drip time |
| Controlled wet-down with reduced water demand | Low-flow suit wet-down shower | Suit compatibility and runoff collection |
| Solution treatment for compatible protective suits | Chemical protective-suit shower | Selected chemistry and rinse sequence |
| Complete personnel rinse between zones | Personnel decontamination shower | Privacy, drainage and emergency provisions |
Compare 8 Blow-Off & Decontamination Systems
Narrow your choices by the features that matter to your application. View specifications and add suitable models to your inquiry list for a tailored quote.
8 models shown
Fixed ドアウェイブローオフポータル
A compact portal-mounted cleaning unit that directs filtered air across personnel at a controlled doorway where a full walk-in chamber cannot be installed.
パーソナル除塵キャビネット
An enclosed personnel dust-removal cabinet that combines directional filtered-air jets with strong extraction to capture contamination released from industrial workwear.
Personnel 霧の除染のシャワー
A controlled exit chamber that applies fine water droplets to bind loose powder on protective garments before de-gowning.
低流量スーツウェットダウンシャワー
A low-consumption protective-suit rinse chamber using zoned water spray to suppress surface dust before removal.
化学の保護スーツの除染シャワー
A protective-suit treatment chamber that doses a compatible solution into a controlled spray cycle followed by a separate rinse.
Personnel の除染のシャワー
A walk-through wash chamber for complete personnel rinsing between a controlled work area and a changing room.
保護スーツの除塵ブース
A dry extraction booth that dislodges loose powder from protective clothing and captures it through a dedicated airflow path.
No models match every selected filter.
Reset one or more filters to compare a broader group.
Reset one or more filters to compare a broader group.
Solutions for Your Application
Overcome the Challenges in Your Process
The correct system depends on whether contamination should be blown away, captured dry, bound with mist or removed through a controlled wet cycle.
A generic entry unit can redistribute dust, use an unsuitable cleaning medium or conflict with the garment-removal sequence.Match process, garment, utilities and traffic direction first, then coordinate enclosure dimensions, controls and service access around the selected workflow.
Loose powder remains on sleeves, boots or the rear of a protective suit after a short cleaning cycle.Select a surrounding nozzle or extraction arrangement and define the operator movement and cycle time around the garment geometry.
A wet process creates excessive runoff or leaves the next user waiting for the chamber to drain.Match mist or low-flow wet-down delivery to the contamination route and coordinate a graded floor, drain capacity and drip-delay sequence.
The cleaning method damages the garment or reacts with the handled material.Confirm garment and contaminant compatibility before selecting dry air, water mist, rinse water or a project-approved treatment solution.
Personnel traffic backs up because the doorway, chamber and cleaning cycle are undersized.Use expected users per hour, clear opening and cycle duration to select the equipment format and required chamber capacity.
Tell Us What Your Application Needs
- Entry or exit purpose
- Garment and contaminant description
- Users per hour or shift
- Available opening and room layout
- Electrical, extraction, water and drain services
- Required cleaning-cycle sequence
- Construction and cleaning preferences
- Destination and project stage
Plan Your Cleanroom Equipment Together
Before choosing Blow-Off & Decontamination Systems
A portal can suit an existing controlled doorway or temporary arrangement when a full enclosed chamber is impractical. Airflow interaction with the surrounding rooms still requires project review.
The contaminant, garment, exposure route and disposal method determine the cleaning process. Material compatibility and site utilities must be confirmed before choosing mist, rinse or chemical treatment.
Yes. Clear opening, chamber size, cycle sequence and control arrangement can be coordinated around expected personnel flow and the available room layout.
Find the Right Personnel Cleaning System
Tell us about your workwear, contamination type and entry layout. Our team will help you select a suitable cleaning approach and prepare a system quotation.
