Complete low-flow suit wet-down shower with stainless chamber and dual doors

人員 · 材料の汚染除去設備

低流量スーツウェットダウンシャワー

A low-consumption protective-suit rinse chamber using zoned water spray to suppress surface dust before removal.

Zoned Low-Flow Sprays
Full-Suit Wetting
Programmed Drip Stage
Serviceable Drain Screen

商品紹介

The low-flow wet-down shower provides more surface wetting than a mist shower without the water demand of a full body wash. Independent upper, middle and boot-level spray bars let the sequence address the whole suit. A removable strainer, flushable branches and a stainless drain pan simplify routine operation in containment change areas.

主要な特徴

Three valved spray levels can be timed separately for hood, body and boots.

Full-cone nozzles deposit a controlled water layer without a hard cleaning jet.

An inline strainer protects small nozzle passages from supply debris.

Branch-end flush points help clear sediment after a campaign.

A drip-delay stage reduces water tracking into the clean changing room.

お客様の製品に関する懸念事項

A wet-down stage must immobilise dust without flooding the exit route or wasting treated water.

A full drench shower uses more water than routine garment wetting needs.Low-flow nozzles apply water only around the occupied suit zone.

One overhead spray misses cuffs and footwear.Upper, middle and lower circuits create height-specific coverage.

Scale blocks the fine nozzles.A cleanable strainer and line-flush connections protect the spray circuit.

Wet suits drip into the dry corridor.The programmed hold period allows drain-down before the exit lock releases.

典型的な用途

Cytotoxic processing exitsFine-chemical pilot plantsNanomaterial suitesControlled waste-transfer rooms

技術的なパラメータ

Representative dimensions for a zoned suit wet-down shower are shown below.

コア材料	PIR-insulated SUS 304 or SUS 316L chamber with low-flow spray bars, strainer and sanitary drain
パネルの厚さ	60-75 mm insulated enclosure panels
有効幅	900-1300 mm clear spray-zone width
最大長さ	Up to 2000 mm chamber length
鋼鉄の厚さを直面する	1.2-1.5 mm stainless-steel internal skin
コア密度	40-45 kg/m³ rigid PIR insulation
熱伝導率	0.021-0.026 W/(m·K) for the panel insulation
表面仕上げ	Brushed stainless steel with coved welds, cleanable spray bars and textured floor
ジョイントタイプ	Liquid-tight panel seams with sanitary clamp pipe joints and compression-gasketed doors
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Heated rinse-water loopAutomatic line flushingBoot-level auxiliary ringConductivity-monitored supply

Planning a Low-Flow Suit Wet-Down Shower specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する