Refrigerated cleanroom pass box with insulated stainless chamber and top cooling module

Peralatan Dekontaminasi Personil dan Bahan

Kotak Pass Cleanroom yang Didinginkan

An insulated, temperature-controlled pass box for short transfers of compatible temperature-sensitive materials.

Insulated Cold Chamber
Programmable Temperature Control
Condensation Drain
Interlocked Cold-Transfer Doors

Perkenalan produk

The refrigerated pass box combines a double-wall insulated stainless chamber with a compact refrigeration module and internal air circulation. The controller holds the selected short-transfer setpoint while a drain removes evaporator condensate. Both doors remain interlocked to preserve the controlled material route; the equipment is intended for transfer rather than long-term product storage.

Fitur utama:

An insulated chamber reduces heat gain during the transfer sequence.

The refrigeration controller maintains the selected operating setpoint.

An internal fan circulates conditioned air around the payload.

A drain route removes moisture from the evaporator section.

Removable shelves allow cleaning and load arrangement.

Kekhawatiran produk pelanggan

Cold transfer must hold a suitable temperature briefly without condensation, door conflict or misuse as long-term storage.

A conventional pass box exposes chilled samples to warm room air.An insulated refrigerated chamber maintains the selected transfer environment.

Condensation drips into the cleanroom wall or chamber.The evaporator section includes a defined condensate drain connection.

Repeated door opening causes rapid temperature swings.Interlocks permit only one door at a time and the controller restores the setpoint after transfer.

Large shelf systems block cold-air circulation.Removable open racks are arranged to leave an air path around the load.

Aplikasi yang Tipis

Temperature-sensitive sample transferPharmacy preparation supportBiotechnology materialsCold-chain component staging

Parameter teknis

Representative construction ranges for a refrigerated cleanroom pass box are shown below.

Bahan inti	SUS 304 or SUS 316L insulated chamber with closed-loop refrigeration module, circulation fan and condensate drain
Ketebalan Panel (Panel Thickness)	60-100 mm insulated double-wall cold-chamber panels
Efektif lebar	400-1000 mm clear refrigerated transfer width
Panjang maksimum	Up to 1200 mm chamber depth
Baja menghadap ketebalan	1.0-1.5 mm stainless-steel facing
Kepadatan inti (core density)	35-40 kg/m³ polyurethane foam insulation
Konduktivitas Termal (Thermal Conductivity)	0.022-0.028 W/(m·K) for polyurethane thermal insulation
Permukaan selesai	Brushed stainless steel with removable shelf racks and cleanable evaporator cover
Jenis Bersama	Continuous-seam insulated chamber with gasketed interlocked doors and sealed condensate connection
Customization (Kustomisasi)	Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi.

Pilihan yang tersedia

Typical 5-15 °C setpoint rangeDigital temperature displayAlarm contactRemovable stainless shelf rack

Planning a Refrigerated Cleanroom Pass Box specification?

Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.

Bicaralah dengan tim kami