Refrigerated cleanroom pass box with insulated stainless chamber and top cooling module

인력 및 재료 오염 제거 장비

냉장실 패스 박스 (Cleanroom Pass Box)

An insulated, temperature-controlled pass box for short transfers of compatible temperature-sensitive materials.

Insulated Cold Chamber
Programmable Temperature Control
Condensation Drain
Interlocked Cold-Transfer Doors

견적 요청 제품 찾아보기

상품 소개

The refrigerated pass box combines a double-wall insulated stainless chamber with a compact refrigeration module and internal air circulation. The controller holds the selected short-transfer setpoint while a drain removes evaporator condensate. Both doors remain interlocked to preserve the controlled material route; the equipment is intended for transfer rather than long-term product storage.

주요 기능

An insulated chamber reduces heat gain during the transfer sequence.

The refrigeration controller maintains the selected operating setpoint.

An internal fan circulates conditioned air around the payload.

A drain route removes moisture from the evaporator section.

Removable shelves allow cleaning and load arrangement.

고객 제품 관심사

Cold transfer must hold a suitable temperature briefly without condensation, door conflict or misuse as long-term storage.

A conventional pass box exposes chilled samples to warm room air.An insulated refrigerated chamber maintains the selected transfer environment.

Condensation drips into the cleanroom wall or chamber.The evaporator section includes a defined condensate drain connection.

Repeated door opening causes rapid temperature swings.Interlocks permit only one door at a time and the controller restores the setpoint after transfer.

Large shelf systems block cold-air circulation.Removable open racks are arranged to leave an air path around the load.

일반적인 응용 프로그램

Temperature-sensitive sample transferPharmacy preparation supportBiotechnology materialsCold-chain component staging

기술 매개변수

Representative construction ranges for a refrigerated cleanroom pass box are shown below.

핵심 재료	SUS 304 or SUS 316L insulated chamber with closed-loop refrigeration module, circulation fan and condensate drain
패널 두께	60-100 mm insulated double-wall cold-chamber panels
유효 폭	400-1000 mm clear refrigerated transfer width
최대 길이	Up to 1200 mm chamber depth
강철 면면 두께	1. 0 - 1. 5 mm 스테인레스 스틸 면재
코어 밀도	35-40 kg/m³ polyurethane foam insulation
열전도도 (Thermal Conductivity)	0.022-0.028 W/(m·K) for polyurethane thermal insulation
표면 마무리	Brushed stainless steel with removable shelf racks and cleanable evaporator cover
접합 유형	Continuous-seam insulated chamber with gasketed interlocked doors and sealed condensate connection
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Typical 5-15 °C setpoint rangeDigital temperature displayAlarm contactRemovable stainless shelf rack

Planning a Refrigerated Cleanroom Pass Box specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.