Anglais
Allemand
Arabe
FrançaisCurrent
Indonésien
Japonais
Coréen
Le malais
Le portugais
russe
espagnol
Thaïlandais
Le turc
Le vietnamien
Equipement de décontamination du personnel et du matériel
Z Boîte de pass de salle blanche réfrigérée
An insulated, temperature-controlled pass box for short transfers of compatible temperature-sensitive materials.
- Insulated Cold Chamber
- Programmable Temperature Control
- Condensation Drain
- Interlocked Cold-Transfer Doors
Introduction de produit
The refrigerated pass box combines a double-wall insulated stainless chamber with a compact refrigeration module and internal air circulation. The controller holds the selected short-transfer setpoint while a drain removes evaporator condensate. Both doors remain interlocked to preserve the controlled material route; the equipment is intended for transfer rather than long-term product storage.
Key Features
The refrigeration controller maintains the selected operating setpoint.
An internal fan circulates conditioned air around the payload.
A drain route removes moisture from the evaporator section.
Removable shelves allow cleaning and load arrangement.
Préoccupations du client produit
Cold transfer must hold a suitable temperature briefly without condensation, door conflict or misuse as long-term storage.
A conventional pass box exposes chilled samples to warm room air.An insulated refrigerated chamber maintains the selected transfer environment.
Condensation drips into the cleanroom wall or chamber.The evaporator section includes a defined condensate drain connection.
Repeated door opening causes rapid temperature swings.Interlocks permit only one door at a time and the controller restores the setpoint after transfer.
Large shelf systems block cold-air circulation.Removable open racks are arranged to leave an air path around the load.
Les applications typiques
Temperature-sensitive sample transferPharmacy preparation supportBiotechnology materialsCold-chain component staging
Paramètres techniques
Representative construction ranges for a refrigerated cleanroom pass box are shown below.
| Matériaux de base | SUS 304 or SUS 316L insulated chamber with closed-loop refrigeration module, circulation fan and condensate drain |
|---|---|
| Panneau épaisseur | 60-100 mm insulated double-wall cold-chamber panels |
| Largeur effective | 400-1000 mm clear refrigerated transfer width |
| Longueur maximale | Profondeur de chambre jusqu'à 1200 mm |
| Acier face épaisseur | 1,0 - 1,5 mm en acier inoxydable |
| Densité Core | 35-40 kg/m³ polyurethane foam insulation |
| Conductivité thermique | 0.022-0.028 W/(m·K) for polyurethane thermal insulation |
| surface finie | Brushed stainless steel with removable shelf racks and cleanable evaporator cover |
| Type joint | Continuous-seam insulated chamber with gasketed interlocked doors and sealed condensate connection |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation. |
Options disponibles
Typical 5-15 °C setpoint rangeDigital temperature displayAlarm contactRemovable stainless shelf rack
Planning a Refrigerated Cleanroom Pass Box specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
