Refrigerated cleanroom pass box with insulated stainless chamber and top cooling module

人員 · 材料の汚染除去設備

冷蔵クリーンルームパスボックス

An insulated, temperature-controlled pass box for short transfers of compatible temperature-sensitive materials.

Insulated Cold Chamber
Programmable Temperature Control
Condensation Drain
Interlocked Cold-Transfer Doors

商品紹介

The refrigerated pass box combines a double-wall insulated stainless chamber with a compact refrigeration module and internal air circulation. The controller holds the selected short-transfer setpoint while a drain removes evaporator condensate. Both doors remain interlocked to preserve the controlled material route; the equipment is intended for transfer rather than long-term product storage.

主要な特徴

An insulated chamber reduces heat gain during the transfer sequence.

The refrigeration controller maintains the selected operating setpoint.

An internal fan circulates conditioned air around the payload.

A drain route removes moisture from the evaporator section.

Removable shelves allow cleaning and load arrangement.

お客様の製品に関する懸念事項

Cold transfer must hold a suitable temperature briefly without condensation, door conflict or misuse as long-term storage.

A conventional pass box exposes chilled samples to warm room air.An insulated refrigerated chamber maintains the selected transfer environment.

Condensation drips into the cleanroom wall or chamber.The evaporator section includes a defined condensate drain connection.

Repeated door opening causes rapid temperature swings.Interlocks permit only one door at a time and the controller restores the setpoint after transfer.

Large shelf systems block cold-air circulation.Removable open racks are arranged to leave an air path around the load.

典型的な用途

Temperature-sensitive sample transferPharmacy preparation supportBiotechnology materialsCold-chain component staging

技術的なパラメータ

Representative construction ranges for a refrigerated cleanroom pass box are shown below.

コア材料	SUS 304 or SUS 316L insulated chamber with closed-loop refrigeration module, circulation fan and condensate drain
パネルの厚さ	60-100 mm insulated double-wall cold-chamber panels
有効幅	400-1000 mm clear refrigerated transfer width
最大長さ	Up to 1200 mm chamber depth
鋼鉄の厚さを直面する	1.0 — 1.5mm ステンレス鋼の面
コア密度	35-40 kg/m³ polyurethane foam insulation
熱伝導率	0.022-0.028 W/(m·K) for polyurethane thermal insulation
表面仕上げ	Brushed stainless steel with removable shelf racks and cleanable evaporator cover
ジョイントタイプ	Continuous-seam insulated chamber with gasketed interlocked doors and sealed condensate connection
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Typical 5-15 °C setpoint rangeDigital temperature displayAlarm contactRemovable stainless shelf rack

Planning a Refrigerated Cleanroom Pass Box specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する